[ovidiubuzzi]

Hello guys....i have a dead frm 3 unit  the owner change the battery by itself and the the frm 3 died windows not working light on the dash....i did try to read d-flash and eeprom but the eeprom see like 4096 b but d-flash 0.Does anyone have any idea?

E87 BASIS
PL2 FRM3R   6135 9224592-01
SW:  115500 / HW:05
Thank you in advance

[tigre]

what too you use to read?

d-flash need to read good, eeprom it is dead, you need to create it

[ovidiubuzzi]

Thank you for your quick answer.I use X-prog M to read p-flash ok,when i am trying to read d-flash and the size window pop up  eeprom size selected automatically but d-flash stays at 0 doesn't let chose any numbers

[Tombo]

Can you read eprom?

[ovidiubuzzi]

Yes eeprom read ok it set up the 4096 bytes but the d-flash is 0 bytes.The P-flash also reads but have a portion where are a few FFFFFFFF.The guy did change the battery and after that frm 3 dead....no windows power,lights ....


Thank you

[tigre]

all frm3 that i recover lost the eeprom and not the d-flash, but i use UPA to read

[ovidiubuzzi]

It does connects ok with the programmer but i saw a few post on forums that sometimes you have to erase eeprom and the write new d-flash to get the normal space.....i am not sure how to do it that is why i am asking before making any mistake

Thank you

[tigre]

check this video for xprog

[Tombo]

The problem may be different. Did you have communication to frm?
Normally if is eprom you can't read dflash. That's normal in working frm.

[ovidiubuzzi]

The guy gave it to me with no car.....he said that he changed the battery after that no power windows no lights on the dash and can not connect to frm3 with LAUNCH tester. I haven't seen the car.The thing that the eeprom reads fin there are no FFFFF.....in P-flash i see some portions with FFFFFFF