Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
OPCOM problem conecting
02-11-2018, 18:16 PM,
Post: #11
|
|||
|
|||
RE: OPCOM problem conecting
hey
i have found one of those chip in one vag tacho that i have here and have desoldered it and put it in the op com. now its working. i finaly can have access to my ecu. Rinestonecowboy do you know another improvements that i can do in this opcom to make it as much stable as it can be? thank you for your help |
|||
02-11-2018, 19:42 PM,
(This post was last modified: 03-11-2018, 04:44 AM by mattydr67.)
Post: #12
|
|||
|
|||
RE: OPCOM problem conecting
If you have A1040 chip on CAN BUS ( especially on HS-CAN ) then you have to change it with TJA1050 or MCP2551/2561/2562
TJA1040 cannot works in High speed CAN as HS-CAN OR CH-CAN but it will do it in MS-CAN. Good luck |
|||
Reputation: +1 - dil6222 [+1] | |||
03-11-2018, 18:44 PM,
Post: #13
|
|||
|
|||
RE: OPCOM problem conecting
(02-11-2018, 19:42 PM)mattydr67 Wrote: If you have A1040 chip on CAN BUS ( especially on HS-CAN ) then you have to change it with TJA1050 or MCP2551/2561/2562 this is my board.... i think it uses the mcp2551 https://www.dropbox.com/sh/8rvv7i7pgpmfe...170237.jpg https://www.dropbox.com/sh/8rvv7i7pgpmfe...170215.jpg |
|||
04-11-2018, 04:51 AM,
(This post was last modified: 04-11-2018, 09:29 AM by mattydr67.)
Post: #14
|
|||
|
|||
RE: OPCOM problem conecting
---------------------------------------------
|
|||
04-11-2018, 08:50 AM,
Post: #15
|
|||
|
|||
RE: OPCOM problem conecting
Hello
Why cant i conect to instruments in a combo c from 2005 1.3 cdti Anybody knows? |
|||
04-11-2018, 16:16 PM,
Post: #16
|
|||
|
|||
RE: OPCOM problem conecting
(04-11-2018, 08:50 AM)CrossMan Wrote: Hello Hello crossman use firmware 1.39 then it should connect and you can read pin change mileage etc but change back to 1.59 if you want to program anything else apart from dash glad you got it working If mine or others posts and info are helpful please give thanks/rep
|
|||
04-11-2018, 17:14 PM,
Post: #17
|
|||
|
|||
RE: OPCOM problem conecting
(04-11-2018, 16:16 PM)dil6222 Wrote:(04-11-2018, 08:50 AM)CrossMan Wrote: Hello I already tried with the firmware 1.39 and it doesnt conect to the module, but it conects to all the other modules. I have used tge 1.39 firmware and the opcom 100219a EN and it doest conect. It conects to my van that is a combo c 2001 1.7di but doesnt conect to my friend combo c 2005 1.3cdti. (04-11-2018, 16:16 PM)dil6222 Wrote:(04-11-2018, 08:50 AM)CrossMan Wrote: Hello I already tried with the firmware 1.39 and it doesnt conect to the module, but it conects to all the other modules. I have used tge 1.39 firmware and the opcom 100219a EN and it doest conect. It conects to my van that is a combo c 2001 1.7di but doesnt conect to my friend combo c 2005 1.3cdti. |
|||
04-11-2018, 17:49 PM,
Post: #18
|
|||
|
|||
RE: OPCOM problem conecting
(04-11-2018, 17:14 PM)CrossMan Wrote:(04-11-2018, 16:16 PM)dil6222 Wrote:(04-11-2018, 08:50 AM)CrossMan Wrote: Hello Sorry my bad try 1.45 If mine or others posts and info are helpful please give thanks/rep
|
|||
01-08-2019, 12:51 PM,
Post: #19
|
|||
|
|||
RE: OPCOM problem conecting
Hi CT members
I am having problem as in pic CRC error=00 H SCAN can someone explain what it is? Second pic I got NO number of measured values. Any advise and help greatly appreciated. Thanks in advance |
|||
01-08-2019, 17:13 PM,
Post: #20
|
|||
|
|||
RE: OPCOM problem conecting
Coverage for A13DTR is starting from 150406b.
But as I remember just with read/erase DTC For mesuring block coverage is starting in 170823c. That's why you can see anything if you are using vauxcom 120309a Good luck |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content