Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BDM 100 inverted Pins
|
01-11-2018, 09:23 AM,
Post: #1
|
|||
|
|||
BDM 100 inverted Pins
Hello everybody,
 I have a BDM 100 clone from DimSport. I read that these have inverted pins +12 & GND, and that some of your ECU has already burned! Did anyone have any experience, or a solution? I do not want to risk burning my ECU? THX in advanced?  
Coding E + F + G Modelles in near from Passau in Germany (Bavaria)!
Navigationmaps Updates for E + F + G Modells! I-Data Update on E + F - Modells. Repair FRM3 & LM !! |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
02-11-2018, 08:13 AM,
(This post was last modified: 02-11-2018, 08:16 AM by Shorty.)
Post: #2
|
||||||||||
|
||||||||||
|
RE: BDM 100 inverted Pins
I also have such a BDM100 clone. There the cable to the ECU is wrong. Normally pin 1 is marked in red. but Pin is on the other side. If you connect it to the probe, the red mark must not point to pin 1! As in the pictures it works for me.
| ||||||||||
