[EACremaps]

i got water damage kessy original and got same hw numbers donor kessy  i need save keys can some one transfer orig data to donor ee 


THANKS for help

[volavka]

original dump look fine So Dont need clone it .. Just swap eeprom and job finished

[EACremaps]

original dump look fine So Dont need clone it .. Just swap eeprom and job finished

i tried this not working this solution as i said hw same but one letter is different siemens part num same sw number same but vag  number letter is diferen donar K original A

[EACremaps]

original dump look fine So Dont need clone it .. Just swap eeprom and job finished

i tried this not working this solution as i said hw same but one letter is different siemens part num same sw number same but vag  number letter is diferen donar K original A

HI Bit update yesterday i did swap mpc from original to donor  put original dump intro eeprom plug intro car read vcds fault is incorect key key signal intermited  and module not coded has to be dump corrupted may some one can recheck ori dump and if is possible fix ORIGINAL NUMBERS 4E0907181A HW 5WK47013 SIEMENS VDO THANKS GUYS

[raffy haddad]

your last reply not understand please verify

did you replace eeprom as volavka told you ? or you read original eeprom and wrote back to donor kessy ? if you read it as 8 and wrote as 8 bit maybe this the probleme
try reread as 16 and write as 16 bit
is the kessy simmens or continental ?

good luck

[EACremaps]

your last reply not understand please verify

did you replace eeprom as volavka told you ? or you read original eeprom and wrote back to donor kessy ? if you read it as 8 and wrote as 8 bit maybe this the probleme
try reread as 16 and write as 16 bit
is the kessy simmens or continental ?

good luck

 

Thanks for replay i swapped eeprom first no luck  then try write eeprom to another chip no luck , i looked by my self and volavka seen looks ok  , then try swap mpc from original to donor same fault vcds incorrect key programmed , wrong  key signal, and module not coded   

Thanks

[raffy haddad]

your last reply not understand please verify

did you replace eeprom as volavka told you ? or you read original eeprom and wrote back to donor kessy ? if you read it as 8 and wrote as 8 bit maybe this the probleme
try reread as 16 and write as 16 bit
is the kessy simmens or continental ?

good luck

 

Thanks for replay i swapped eeprom first no luck  then try write eeprom to another chip no luck , i looked by my self and volavka seen looks ok  , then try swap mpc from original to donor same fault vcds incorrect key programmed , wrong  key signal, and module not coded   

Thanks

with all my respect your original dump not good
not accepted by my key maker
your donor kessy accepted by my key maker
try read orig eeprom as 16 bit and post here

your original eep not have login or key infos
your donor eeprom have login and key infos

[EACremaps]

your last reply not understand please verify

did you replace eeprom as volavka told you ? or you read original eeprom and wrote back to donor kessy ? if you read it as 8 and wrote as 8 bit maybe this the probleme
try reread as 16 and write as 16 bit
is the kessy simmens or continental ?

good luck

 

Thanks for replay i swapped eeprom first no luck  then try write eeprom to another chip no luck , i looked by my self and volavka seen looks ok  , then try swap mpc from original to donor same fault vcds incorrect key programmed , wrong  key signal, and module not coded   

Thanks

with all my respect to volavka your original dump not good
not accepted by my key maker
your donor kessy accepted by my key maker
try read orig eeprom as 16 bit and post here

part number of original 4e0907181a Siemens vdo  anything we can do ? fix a dump , save a key etc ....THANKS

[raffy haddad]

your last reply not understand please verify

did you replace eeprom as volavka told you ? or you read original eeprom and wrote back to donor kessy ? if you read it as 8 and wrote as 8 bit maybe this the probleme
try reread as 16 and write as 16 bit
is the kessy simmens or continental ?

good luck

 

Thanks for replay i swapped eeprom first no luck  then try write eeprom to another chip no luck , i looked by my self and volavka seen looks ok  , then try swap mpc from original to donor same fault vcds incorrect key programmed , wrong  key signal, and module not coded   

Thanks

with all my respect to volavka your original dump not good
not accepted by my key maker
your donor kessy accepted by my key maker
try read orig eeprom as 16 bit and post here

part number of original 4e0907181a Siemens vdo  anything we can do ? fix a dump , save a key etc ....THANKS

Look on the left ori eep on the right donor eep

[EACremaps]

your last reply not understand please verify

did you replace eeprom as volavka told you ? or you read original eeprom and wrote back to donor kessy ? if you read it as 8 and wrote as 8 bit maybe this the probleme
try reread as 16 and write as 16 bit
is the kessy simmens or continental ?

good luck

 

Thanks for replay i swapped eeprom first no luck  then try write eeprom to another chip no luck , i looked by my self and volavka seen looks ok  , then try swap mpc from original to donor same fault vcds incorrect key programmed , wrong  key signal, and module not coded   

Thanks

with all my respect to volavka your original dump not good
not accepted by my key maker
your donor kessy accepted by my key maker
try read orig eeprom as 16 bit and post here

part number of original 4e0907181a Siemens vdo  anything we can do ? fix a dump , save a key etc ....THANKS

Look on the left ori eep on the right donor eep

i see now vcds read correct vin but key and pin gone what else cs ? what the best solution to sorting it out thanks 
as i said donor module got already original module mpc i swapped yesterday