[deutsch]

---

hi all,

the car in question is a march 2012 F20 BMW 116i.

my original radio HU_ENTRY was stolen from my car so i have now replaced it with a used HU_ENTRY unit.

after completing vin change and coding etc. my bluetooth and usb is not working.

i have now found that the following fsc codes:

AppID 129 (81) - Media Player (USB)
AppID 130 (82) - Telephone (Bluetooth)

need to be changed to the correct ones for my car, i have the correct ones now but i am unable to insert them to the unit as the new/used replacement unit is newer than my car therefore my original fsc codes are to old to replace the younger/newer ones in the replacement unit.

to get my fsc codes to be accepted by the HU_ENTRY i need to virginize it / delete the current fsc codes from HU_ENTRY so my fsc codes can be written.


i can find info on clearing fsc codes from NBT but not from HU_ENTRY

can anyone explain to me how this can be done please.


thanks in advance

[Esysx]

---

hi all,

the car in question is a march 2012 F20 BMW 116i.

my original radio HU_ENTRY was stolen from my car so i have now replaced it with a used HU_ENTRY unit.

after completing vin change and coding etc. my bluetooth and usb is not working.

i have now found that the following fsc codes:

AppID 129 (81) - Media Player (USB)
AppID 130 (82) - Telephone (Bluetooth)

need to be changed to the correct ones for my car, i have the correct ones now but i am unable to insert them to the unit as the new/used replacement unit is newer than my car therefore my original fsc codes are to old to replace the younger/newer ones in the replacement unit.

to get my fsc codes to be accepted by the HU_ENTRY i need to virginize it / delete the current fsc codes from HU_ENTRY so my fsc codes can be written.


i can find info on clearing fsc codes from NBT but not from HU_ENTRY

can anyone explain to me how this can be done please.


thanks in advance

I would like to know also as I have a similar issue 

Thanks

[CEBEP]

---

hi all,

the car in question is a march 2012 F20 BMW 116i.

my original radio HU_ENTRY was stolen from my car so i have now replaced it with a used HU_ENTRY unit.

after completing vin change and coding etc. my bluetooth and usb is not working.

i have now found that the following fsc codes:

AppID 129 (81) - Media Player (USB)
AppID 130 (82) - Telephone (Bluetooth)

need to be changed to the correct ones for my car, i have the correct ones now but i am unable to insert them to the unit as the new/used replacement unit is newer than my car therefore my original fsc codes are to old to replace the younger/newer ones in the replacement unit.

to get my fsc codes to be accepted by the HU_ENTRY i need to virginize it / delete the current fsc codes from HU_ENTRY so my fsc codes can be written.


i can find info on clearing fsc codes from NBT but not from HU_ENTRY

can anyone explain to me how this can be done please.


thanks in advance

I would like to know also as I have a similar issue 

Thanks

This is procedure for entrynav, but you can try in entry unit:

- Open Tool32 and load Entrynav.prg
- find job named like this: steuern_persistency_clear
- write 0x01 in the argument box
- double click on job

[Esysx]

---

hi all,

the car in question is a march 2012 F20 BMW 116i.

my original radio HU_ENTRY was stolen from my car so i have now replaced it with a used HU_ENTRY unit.

after completing vin change and coding etc. my bluetooth and usb is not working.

i have now found that the following fsc codes:

AppID 129 (81) - Media Player (USB)
AppID 130 (82) - Telephone (Bluetooth)

need to be changed to the correct ones for my car, i have the correct ones now but i am unable to insert them to the unit as the new/used replacement unit is newer than my car therefore my original fsc codes are to old to replace the younger/newer ones in the replacement unit.

to get my fsc codes to be accepted by the HU_ENTRY i need to virginize it / delete the current fsc codes from HU_ENTRY so my fsc codes can be written.


i can find info on clearing fsc codes from NBT but not from HU_ENTRY

can anyone explain to me how this can be done please.


thanks in advance

I would like to know also as I have a similar issue 

Thanks

This is procedure for entrynav, but you can try in entry unit:

- Open Tool32 and load Entrynav.prg
- find job named like this: steuern_persistency_clear
- write 0x01 in the argument box
- double click on job

I tried but I get ecu out of range ?

[Wibbles]

I have the same issue, that job does not exist in the ENTRY.prg Tool32 job.

[torchia]

for hu_entry cic.prg

I have tried this from other tread:

CIC.prg steuern_persistenz with arg 1
Arg: 0 Alles (disabled), 1 nur SWT Persistenz (disabled)
2 Löschen der Navi-Kalibrierung

tried with argument 0, 1 and 2. the result the same, won't allow to upload new FSC - creation date error....

Should I try to flash it?

[BMWdriva]

for hu_entry cic.prg

I have tried this from other tread:

CIC.prg steuern_persistenz with arg 1
Arg: 0 Alles (disabled), 1 nur SWT Persistenz (disabled)
2 Löschen der Navi-Kalibrierung

tried with argument 0, 1 and 2. the result the same, won't allow to upload new FSC - creation date error....

Should I try to flash it?

re-flash no help  I think that there is no solution as for champ 2

[Wibbles]

It's not CHAMP2 - it's HU_ENTRY

[mmauto01]

to get my fsc codes to be accepted by the HU_ENTRY i need to virginize it / delete the current fsc codes from HU_ENTRY so my fsc codes can be written.

++++
i had same issue with E70 2 weeks ago ,im not sure if it's same solution but to virgin the fsc this is what i did :
there is a file that you need to copy to flash drive 2 or 4 or 8gb memory that you need to format it fat32 before you copy the file to it .
then connect it to the usb of that is coming from the head unit ,most of time there is 2 usb ,you will need to use the one in glove box if your has it ,if not you will need to find it .
after that the headunit will reboot and that way it will be virgin and you can load your fsc certificate to it .

here is a link for the thread that explain all 
https://cartechnology.co.uk/showthread.php?tid=23198

please click thanks and reputation . 
good luck and hope it helps 

[Wibbles]

to get my fsc codes to be accepted by the HU_ENTRY i need to virginize it / delete the current fsc codes from HU_ENTRY so my fsc codes can be written.

++++
i had same issue with E70 2 weeks ago ,im not sure if it's same solution but to virgin the fsc this is what i did :
there is a file that you need to copy to flash drive 2 or 4 or 8gb memory that you need to format it fat32 before you copy the file to it .
then connect it to the usb of that is coming from the head unit ,most of time there is 2 usb ,you will need to use the one in glove box if your has it ,if not you will need to find it .
after that the headunit will reboot and that way it will be virgin and you can load your fsc certificate to it .

here is a link for the thread that explain all 
https://cartechnology.co.uk/showthread.php?tid=23198

please click thanks and reputation . 
good luck and hope it helps 

Of no help whatsoever - this is HU_ENTRY, not CIC  - totally different units.