[Jigsawed]

Hello friends

Please can someone help me with Immo Off, 
ive already tried using vag tacho, vag commander but im not able to find sku or disable the immobiliser 
I used KessV2 to read map from my ecu

W: 0261S01009
SW: 1037368005
Engine: MED7.5.11       
SW upg.: 036906013F  5130

Audi A2 Fsi 
Bosch MED7.5.11 ecu

many thanks in advance

[23Andi23]

Hello friends

Please can someone help me with Immo Off, 
ive already tried using vag tacho, vag commander but im not able to find sku or disable the immobiliser 
I used KessV2 to read map from my ecu

W: 0261S01009
SW: 1037368005
Engine: MED7.5.11       
SW upg.: 036906013F  5130

Audi A2 Fsi 
Bosch MED7.5.11 ecu

many thanks in advance

Read eeprom by programmer or ktag immo is stored in eeprom not in flash

[Abou-raffik]

Post your E2P here not flash file

[Jigsawed]

Thankyou 23Andi23 & BOULEFAA for your replies my bad as thought you could remove the immo via the flash map dump..
Im new to reprogramming immo via a eeprom dump, ive only ever used vag k to find the sku and then my ross tech to reprogramme new keys transponder chips so still learning the basics.
The ecu im trying to remove the immobiliser is a spare that i need to interchange between a few cars so immo needs to be off , ive used my vag commander to read the ecu eeprom data , ive also read a spare instrument cluster as unsure if reading the ecu this way works.
Ive added these files and if someone could take a look to see if they are correct and can be modified to remove the immo so i can then write the file back that would be very much appreciated .. 

many thanks in advance

[CHIKODIAG]

HI 
desolder the eprom and read thene post your file 
good luck

[aysmi1990]

[quote = "Scie sauteuse" pid = '404212' dateline = '1545577594']
enjoy


[/citation]