[KAMIKA]

storia set.rar
File Type:
Downloaded:	17 times
Size:	237 bytes

storia set.rar
File Type:
Downloaded:	17 times
Size:	237 bytes

storia set.rar
File Type:
Downloaded:	17 times
Size:	237 bytes

Hi, CT. Peaese help with this Daihatsu Storia 2002, car lost all keys and was worked on previously so i find it with a previously programmed 4C chip which reads as key2 on tango. Reprogrammed another 4C as key 1, still only cranks. so i go on to look for complete files on the web i found some and loaded the ECU file to a 93c56 and reprogrammed chip to the new file then wrote into immo eeprom 93LC66. When i go to test, no start but cranks, faults on immo is: B2787, Main key ID code is not registered.... On ECU fault is: P1601, transponder/immobilizer communication (code mismatched, communication faulty). im not sure where to go from here, any help please, even immo off would help. I attach current ECU AND immo files...

[raffy haddad]

Hi, CT. Peaese help with this Daihatsu Storia 2002, car lost all keys and was worked on previously so i find it with a previously programmed 4C chip which reads as key2 on tango. Reprogrammed another 4C as key 1, still only cranks. so i go on to look for complete files on the web i found some and loaded the ECU file to a 93c56 and reprogrammed chip to the new file then wrote into immo eeprom 93LC66. When i go to test, no start but cranks, faults on immo is: B2787, Main key ID code is not registered.... On ECU fault is: P1601, transponder/immobilizer communication (code mismatched, communication faulty). im not sure where to go from here, any help please, even immo off would help. I attach current ECU AND immo files...

hello
the 3 files rar are the same
in your immo file all your keys are used
anyway here try this file in ecu eeprom you will find v1 and v2
try them and report back please

[KAMIKA]

THANKS raffy haddad, will test and report tomorrow.