[ecuofflimits]

Hi there is anyone who could help me to remove the dtc p1302 on iaw5sf ecu of a 1.2 1.2 petrol? Thanks to everyone in advance.

[aysmi1990]

[quote="ecuofflimits" pid='405548' dateline='1545952941']
there is a switch on top of the clutch pedal .. your's might not be working.. ( see with MES).
You can check in the "Paramaters" section after you connect to the engine ecu...you should see "Clutch" or "clutch pedal".. and it should change it's value to "pressed" when pressed.
You can reset the switch with a pair of pliers just as you would the brake switch.

Also, specific conditions need to be met in order for the learning procedure to complete.

[ecuofflimits]

[quote="ecuofflimits" pid='405548' dateline='1545952941']
there is a switch on top of the clutch pedal .. your's might not be working.. ( see with MES).
You can check in the "Paramaters" section after you connect to the engine ecu...you should see "Clutch" or "clutch pedal".. and it should change it's value to "pressed" when pressed.
You can reset the switch with a pair of pliers just as you would the brake switch.

Also, specific conditions need to be met in order for the learning procedure to complete.

Hello and thanks for the answer but the switch has already been checked the machine is fine and only has the problem of the dtc light on and if anyone knew how to eliminate it would be perfect.