Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ford Mazda 112
17-02-2019, 08:41 AM,
Post: #11
|
|||
|
|||
RE: Ford Mazda 112
Hey all, anyone else using Vxdiag NANO with 112? I try to connect to a car and the screen goes blue and stays there for ages... Help?
|
|||
19-02-2019, 01:19 AM,
Post: #12
|
|||
|
|||
RE: Ford Mazda 112
|
|||
25-02-2019, 17:08 PM,
Post: #13
|
|||
|
|||
RE: Ford Mazda 112
the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.
|
|||
26-02-2019, 04:21 AM,
Post: #14
|
|||
|
|||
RE: Ford Mazda 112
|
|||
28-02-2019, 11:20 AM,
(This post was last modified: 28-02-2019, 11:23 AM by gaoan000.)
Post: #15
|
|||
|
|||
RE: Ford Mazda 112
(25-02-2019, 17:08 PM)bobdinro Wrote: the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.i dont known what you mean, can you pm a picture to me? (26-02-2019, 04:21 AM)wakawaka Wrote:(25-02-2019, 17:08 PM)bobdinro Wrote: the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration. i tested win7 & win10 |
|||
01-03-2019, 09:54 AM,
Post: #16
|
|||
|
|||
RE: Ford Mazda 112
|
|||
01-03-2019, 14:36 PM,
Post: #17
|
|||
|
|||
RE: Ford Mazda 112
those facing issue, whats your VCX device firmware version ?
# VCX Firmware Update History ============================================================== ## 2019.02.21 v1.5.0.0 ------------------------------------------ * Upd VCXBoot v1.5.0.0 multiple app boot and update. * Fix J1939 flow control process when broadcast mixed with normal message(CUMMINS-QSC8.3). * Imp USB connection status and other etc. ------------------------------------------ * 更新 VCXBoot v1.5.0.0 多分区引导和固件更新. * 修正 J1939 多帧消息与广播消息混合时的流控制处理(CUMMINS-QSC8.3). * 优化 USB 连接状态和其他. ============================================================== ## 2018.12.27 v1.4.11.0 ------------------------------------------ * Fix J1939 Filter PGN=00EF00 with connection management(CAT-320D2) * Fix J1939 broadcast filter and broadcast mixed with normal message(CUMMINS-QSM11). * Imp Host and device communiction performance (Fix communication CS error sometimes). ------------------------------------------ * 修正 J1939 过滤器 PGN=00EF00 增加连接管理(CAT-320D2). * 修正 J1939 广播消息过滤, 广播消息与普通多帧消息混合(CUMMINS-QSM11). * 优化 主机和设备之间通信效率(修复通信校验CS可能出错). ============================================================== ## 2018.11.30 v1.4.10.0 ------------------------------------------ * Fix ISO15765 flow control frame send error. * Fix CAN2 driver control process. * Add V83 new hardware bus switch(Read OBD Pin Voltage). * Fix J1708 pin initiation. ------------------------------------------ * 修正 ISO15765 流控制帧发送错误. * 修正 CAN2 驱动器控制信号逻辑顺序. * 新增 V83 新版本硬件总线开关切换(读OBD引脚电压). * 修正 J1708 引脚初始化. ============================================================== ## 2018.05.10 v1.4.4.0 ------------------------------------------ * Fix BENZ C6 CAN Bus KL15 signal filter * Fix BENZ C6 MBISO 5BPS initialization ------------------------------------------ * 修正 支持 BENZ C6 CAN 总线点火信号过滤 * 修正 支持 BENZ C6 MBISO 协议 5BPS 初始化 ============================================================== ## 2017.12.04 v1.4.2.0 ------------------------------------------ * Fix HS-CAN error when multiple channel working (JLR). ------------------------------------------ * 修正 CAN 多通道工作时 HS-CAN 可能通信错误 (路虎第一路CAN不能测以及止动装置错误). ============================================================== ## 2017.11.07 v1.4.1.0 ------------------------------------------ * Fix J1939 protocol error for CUMMINS CM850. ------------------------------------------ * 修正 J1939 协议测试 CUMMINS CM850 连接错误. ============================================================== ## 2017.09.17 v1.4.0.0 * Add Expasion DoIP device information sync with VCX. ------------------------------------------ * 增加 扩展设备DOIP 与 VCX 同步扩展信息. ============================================================== ## 2017.09.05 v1.3.6.0 * Optimize CAN PS switch logic. * Optimize TP20 protocol for J2534. * Fix KW1281 reset to IDLE when tx error. ------------------------------------------ * 优化 NANO 系列 CAN PS 引脚选择逻辑. * 优化 TP20 协议符合 J2534标准. * 修正 KW1281 发送错误时恢复空闲状态. ============================================================== ## 2017.08.26 v1.3.5.0 * Fix v1.3.4.0 error for CAN OBD12/13. ------------------------------------------ * 修正 v1.3.4.0 固件引起的 CAN OBD12/13 错误. ============================================================== ## 2017.08.23 v1.3.4.0 * Fix CAN lost data in callback when multi channel scanning(PORSCHE). * Fix CAN block filter do not set to hardware. * Add J1850 VPW and PWM switch(PB3). ------------------------------------------ * 修正 CAN 回掉处理丢失数据, 当多通道扫描时(PORSCHE). * 修正 CAN 阻止过滤器不需要配置到硬件. * 增加 J1850 VPM 和 PWM 切换开关(PB3). ============================================================== ## 2017.07.04 v1.3.3.0 * Fix CAN frame queue crash when receive large amount data(BENZ). * Optimize CAN rx handler and FIFO. * Optimize CAN reinit. * Optimize CAN filter overflow. ------------------------------------------ * 修正 CAN 接收海量数据时缓冲队列溢出设备死机(BENZ). * 优化 CAN 接收中断和FIFO. * 优化 CAN 重新初始化. * 优化 CAN 过滤器溢出处理. ============================================================== ## 2017.06.07 v1.3.1.0 1. Fix SWCAN error for GM GDS2. 2. Fix CAN filter clear. ============================================================== ## 2017.05.22 v1.3.0.0 1. Modify CAN hardware filter for multiple channel(for BENZ). ============================================================== ## 2017.05.19 v1.2.3.11 1. Fix OBD pin voltage read for new VCX-PRO device. ============================================================== ## 2017.04.18 v1.2.3.10 1. Fix ISO15765 standard extend addr error. 2. Fix CAN baud 800k error. |
|||
08-03-2019, 05:04 AM,
(This post was last modified: 08-03-2019, 05:07 AM by bobdinro.)
Post: #18
|
|||
|
|||
RE: Ford Mazda 112
(28-02-2019, 11:20 AM)gaoan000 Wrote:(25-02-2019, 17:08 PM)bobdinro Wrote: the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.i dont known what you mean, can you pm a picture to me? Have you test the service functions? Programing function? For me is not working whole windows stop responding when starting functions and i have to reset computer. Windows7 32bit |
|||
09-03-2019, 14:12 PM,
Post: #19
|
|||
|
|||
RE: Ford Mazda 112
(08-03-2019, 05:04 AM)bobdinro Wrote:i dont known what you mean, you can send me a pic or something(28-02-2019, 11:20 AM)gaoan000 Wrote:(25-02-2019, 17:08 PM)bobdinro Wrote: the patch work ok activate and program starts, still computer freeze when starting adaptation function or DPF regeneration.i dont known what you mean, can you pm a picture to me? |
|||
28-04-2019, 18:44 PM,
Post: #20
|
|||
|
|||
RE: Ford Mazda 112
Actually I bought the VCMII clone with software 113v ford and 112 mazda.
the ford software all good, but the mazda software asks me for a license, since I occupy the patch. Does anyone have a solution for the mazda 112v with VCM2? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content