Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DME 7565300 BOSCH me9.2 MPC564 unlock to write by xprog??!! any idea?!
19-01-2019, 13:13 PM,
(This post was last modified: 19-01-2019, 13:40 PM by iyade46.)
Post: #1
|
|||
|
|||
DME 7565300 BOSCH me9.2 MPC564 unlock to write by xprog??!! any idea?!
DME 7565300 BOSCH me9.2 MPC564 unlock to write by xprog??!! any idea?!
i canread it with xprog but i cant write ir erase becose i need to connect vcc to pin in MCU and external flash any one know what or how to make that? |
|||
20-01-2019, 10:47 AM,
Post: #2
|
|||
|
|||
RE: DME 7565300 BOSCH me9.2 MPC564 unlock to write by xprog??!! any idea?!
This ECU don't write XPROG, only READ
Use - BDM100, KTAG |
|||
24-01-2019, 03:08 AM,
Post: #3
|
|||
|
|||
RE: DME 7565300 BOSCH me9.2 MPC564 unlock to write by xprog??!! any idea?!
You need to pull the WP write protect pin high, check what flash chip you have and find the data sheet for it, I think 28f800
You can pull it high by unsolder and lift that pin, connect to 5v source through a 1k resistor, and it should be free to erase and program. The last time I had one of these, I just transferred the flash chip instead of single pins and resistors etc. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content