[td60dab]

This Thread is for my Standalone Releases, always latest.

Instruction Step by Step from hashtagmaster.

From ISTA 4.37.22 need renew license, simple remove license from registry and make new request.

From ISTA 4.32.2x is a personalized license required. Click here to Request.

ISTA Standalone

* fix ICOM connection with enabled "Ethernet as preferred communication channel..."
* Reject fake FSC's disabled permanently.
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config. (Windows 7 not supported)
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* Diagnose for J29 (Toyota Supra) is now always enabled.
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)
* If use ICOM then also install original Firmware on your PC to avoid "Firmware" message in ISTA

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same patchVersion as App (example 4.37.4x).
- for Programming is SDP needed, using older or newer Versions allowed.

Installer need this structure (see attachment):

Downloaddirectory
|  ista_standalone_installer_4.37.43.exe
|  ISTA_v4.37.43.23791.7z (required)
|  BLP_4.37.42.7z (required)
|  SDP_4.37.42.7z (if needed)
|  ExecutionBreak_4.37.20.7z (optional and if exist)
|  setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
        EN_4.37.40.7z (required)
        DE_4.37.40.7z (if needed)
        GLOBAL_4.37.40.7z (required)


Standalone: ISTA 4.37.43.23791 / SQLiteDBs (OTHER,en-GB,de-DE,it-IT,zh-CN) 4.37.40 / SDP-BLP 4.37.42
Standalone Installer (all above files/folders must be present in the same directory): v4.37.43
PSdZData Lite: v4.37.42

Standard Tools Installer v2.12.2 (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v69.0)
SP-Daten v69.0

Tip: to download from Mega use MegaSync with Free/Pro Mega-Account. MegaSync with free-account will continue after a break, be patient.

Hi Sedoy

First, Hope you have a nic Christmas & New Year....

Ihave got 4.37.43 installed & activated, thanks you for licence...

I've renewed SDP files ok and updated registry file so it shows when i start ISTA...

Where do I save new BLP files because its not clear to me...?

regards