[torquefreaks]

Is it possible that someone could pleeeease help me with fixing the cheksum on my modded file? I paid for a modded file thinking my fgtech v54 would auto correct it when writing but it doesnt for write all and the modded file i have is for full write.

[Radco555]

test and report  

[Александр530рус]

Try my solution

[torquefreaks]

ok so this seems to be never ending    i tried to write the file and i get a error at 4% and i have not even the slightest clue as to why. i can write the original eeprom and ext flash the i read but if i try to write the int flash it fails. Ive attached a picture of the error prompt and the error log it saved. oh and i can still read all, or read everything individually with no issues.

[Александр530рус]

Try my solution

[torquefreaks]

thanks friend i just tried your file and same thing fails at 4%. I think i may know where i went wrong now. So when i originally fried my ecu, i bought a used ecu. Then i did a full read of the fried ecu, went to write the full read to the used ecu but got the checksum not supported prompt so i cancelled and just wrote the eeprom. Then i tested it in our x5 and the vehicle started good and had just the same codes as before due to adblue parts being unplugged. Then i emailed the full read from the original fried ecu to have adblue removed and that I think is my mistake. I should of done a full read from the used ecu after writing the eeprom and emailed that file for adblue removal. Reason i think this is because i just did a full write with your file to the original fried ecu no problem 100% but soon as i try the used ecu it fails at 4%. What are the chances someone could help me out and removed adblue and fix checksum of the new full read i just took from my used ecu?

[Александр530рус]

Try to set the minimum speed.

[torquefreaks]

how do I slow the speed down? i cant find the option in device manager under fgtech driver

[Александр530рус]

In the program itself, look

[torquefreaks]

I checked in the program and its headings are language, master, help and exit and i cant find anything to do with speed