Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW F31 MOVE update problem
04-03-2019, 09:43 AM,
Post: #1
|
|||
|
|||
BMW F31 MOVE update problem
Hi,
I am currently having the following problem with MOVE 2018-2 in a BMW F31 2013 It updated till 5% and then rebooted. After reboot it does not read navi USB anymore (tried 3 different USB's) It says "Navigation is not available, ensure to complete the update" I also tried 2018-1 on different USB, also did not work. I let car sleep and reset CHAMP2 numerous times. Does anyone have a solution for this? Or can point me in the right TOOL32 argument job to clear this? Thanks! |
|||
04-03-2019, 10:22 AM,
(This post was last modified: 04-03-2019, 10:22 AM by paulgsm.)
Post: #2
|
|||
|
|||
RE: BMW F31 MOVE update problem
Did you move the car while doing map update ?
Check USB to be Fat32 formated ! |
|||
04-03-2019, 10:33 AM,
Post: #3
|
|||
|
|||
RE: BMW F31 MOVE update problem
(04-03-2019, 10:22 AM)paulgsm Wrote: Did you move the car while doing map update ? Yes I did move the car while updating. Of course, all 4 different USB's sticks that I always use for updates, are FAT32 formatted, even reinstalled. The problem is now that the navigation will not allow me to proceed with the update. It just "hangs". I think there are TOOL32 jobs/arguments that can solve this. But not sure which ones. |
|||
04-03-2019, 21:26 PM,
Post: #4
|
|||
|
|||
RE: BMW F31 MOVE update problem
Try that the next day.
That the navi should fall asleep. |
|||
04-03-2019, 22:54 PM,
Post: #5
|
|||
|
|||
RE: BMW F31 MOVE update problem
Thanks. Sleep did not solve. Who knows tool32 job/arguments?
|
|||
06-03-2019, 08:48 AM,
Post: #6
|
|||
|
|||
RE: BMW F31 MOVE update problem
Anyone knows the tool32 job/argument?
|
|||
06-03-2019, 09:00 AM,
Post: #7
|
|||
|
|||
RE: BMW F31 MOVE update problem
I think the SD card has been corrupted, and it can not be restored with tools32, you can try to program the HU unit, if it is still seen by E-sys
|
|||
06-03-2019, 09:04 AM,
Post: #8
|
|||
|
|||
RE: BMW F31 MOVE update problem
HU works perfectly besides navigation. You suggest flashing champ2?
|
|||
06-03-2019, 09:07 AM,
Post: #9
|
|||
|
|||
RE: BMW F31 MOVE update problem
|
|||
06-03-2019, 10:08 AM,
Post: #10
|
|||
|
|||
RE: BMW F31 MOVE update problem
(06-03-2019, 09:07 AM)smercki Wrote:(06-03-2019, 09:04 AM)sqorpius Wrote: HU works perfectly besides navigation. You suggest flashing champ2?first make a diagnosis with Ista and see if he offers some recovery program Already tried ISTA, it states that MAP DATA is not available. Corresponding ABL = to install new map data through USB, but it wont let me. USB loads, but CHAMP2 does not kick in map install mode.. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content