[mark.c.84]

That's normal. Radio VIN does not match car VIN. So use emulator or script or fake fsc matching car VIN.
Plenty of threads about it.

why fake fsc? he can use orignal fsc reapir kit from asap, ?

There won't be any FSC for a CIC for his car's VIN since this car did not have a CIC from factory.

hi this car had cic from factory just replaced as old one was faulty

thanks mark

[bmwcoder75]

That's normal. Radio VIN does not match car VIN. So use emulator or script or fake fsc matching car VIN.
Plenty of threads about it.

why fake fsc? he can use orignal fsc reapir kit from asap, ?

There won't be any FSC for a CIC for his car's VIN since this car did not have a CIC from factory.

hi this car had cic from factory just replaced as old one was faulty

thanks mark

Ah yes you are right I missed that part. What a mess OP. Would have been a 5mn job...

[mark.c.84]

That's normal. Radio VIN does not match car VIN. So use emulator or script or fake fsc matching car VIN.
Plenty of threads about it.

why fake fsc? he can use orignal fsc reapir kit from asap, ?

There won't be any FSC for a CIC for his car's VIN since this car did not have a CIC from factory.

hi this car had cic from factory just replaced as old one was faulty

thanks mark

Ah yes you are right I missed that part. What a mess OP. Would have been a 5mn job...

do you have any help for me as im stuck or do you know anywhere that can help

thanks again mark

[bmwcoder75]

Get original FSC files and load them up. Someone might provide them to you or BMW dealer can supply them to you too.

[____ANGEL___]

you need to upgrade sw on the cic. it says clearly in the instructions of the script

that's been done it was coded via bmw ista to latest level

How much time ista p took for that? Programming an e92 only cic with icom a + b takes almost 2 to 3 hours with latest i-level. Entire car J394230 more than 3 hours... Ista p won't let you code a unit if you don't program it before. The only case you can do this is if the unit has yet the latest software and that's not your case because the script don't work... Neither in expertmode if you try to exclude programming actions to do only coding, it restores automatically also the programming actions. Try and see. Obviously you have to connect a programming power supply to do that, 50amps will be enough if your battery is ok anyway bmw reccomends 90 amps or more according to the last tech infos.... previously some years ago 70amps.


Here's your repair kit, before use it you must have to change VIN in used cic, it don't require update or anything, only import. You can do this actions with FSTool quickly...