[AW1962]

Hello,

I want to replace my tv module DVB-T with newer one DVBT-T2. My car ist a F01 LCI built 09/2012 with NBT. I just want to know, if s.o. has the experience, which tv module is suitable (OEM-No). And another question is how to modify the HO-Wort to TVT2. Did s.o. have a manual or description how to manage this? Is E-Sys or ISTA/P better?

Thanks in advance.

Regards
AW1962

[DayvG]

It should be as simple as adding the new unit and VO coding with your FA. Why would you need to modify the HO-Wort? E-SYS should be sufficient. Are you familiar with VO coding?

[AW1962]

I am not familiar in VO coding thats why I am asking for a manual.

[mjuhl2003]

I have done that - and it works very well. you have to change the VO and add in the section HO-words "TVT2" for the new digital TV module with CA slot.

Use E-sys to change to VO and recode the TV module

[AW1962]

@ [b]mjuhl2003 [/b]
Which DVBT-T2 module did you use for replacing?

[DayvG]

Have a look here

[AW1962]

Thank you all for your answers.

Which kind of power supply do you use for the TV-modul (i.e. 70A or more or none)?

[DayvG]

If you are just go coding the TV module after install you will be fine without a charger. If you were to flash the whole vehicle or the NBT I would recommend a charger, for just the TV module, you will be fine

[user_530d]

You have coded Headunit also.

[DayvG]

Good evening,
I just tried to make my T2 module work.
I've modified the VO and recoded the TV module. But still most TV channels aren't receivable.
System finds them but doesn't show them. I'm using a freenet CI-card.
Any ideas?

The unit will likely need to be flashed. It’s a common problem with these. I’ve flashed mine 3 times over the 4 years I’ve had it installed due to the channel not showing issue.