Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

VAS5054A PCB Difference
11-09-2019, 20:40 PM,
Post: #261
ZVW  RE: VAS5054A PCB Difference
I received mine, what I was looking was:
1. ...55F SDRAMs since they were supposed to be working on 5v even they are slower a little bit, but that is ok for me
2. I did not care about OKI, just wanted tool with right diode order and chips
3. I wanted to find one with ORI amb2300

And when I find one that looked like I wanted on pics, I ordered it and received it and connected it via BT and USB to ODSI from virtual, also to Forcar as passthru, but when I opened it I was disappointed, and here are pics so you can now why...

I am right now talking with seller if we dont find agreement I will open a dispute on Ali...


           
Quote this message in a reply
[+] 1 user says Thank You to no_name for this post
11-09-2019, 22:19 PM,
Post: #262
RE: VAS5054A PCB Difference
(11-09-2019, 20:40 PM)no_name Wrote:  I received mine, what I was looking was:
1. ...55F SDRAMs since they were supposed to be working on 5v even they are slower a little bit, but that is ok for me
2. I did not care about OKI, just wanted tool with right diode order and chips
3. I wanted to find one with ORI amb2300

And when I find one that looked like I wanted on pics, I ordered it and received it and connected it via BT and USB to ODSI from virtual, also to Forcar as passthru, but when I opened it I was disappointed, and here are pics so you can now why...

I am right now talking with seller if we dont find agreement I will open a dispute on Ali...
You hawe a good unit for rework. Kan buy a original AMBER 2300 from Ebay, and all ader component from Mouser.
Will be a good unit. For AMB2300 firmware send me a PM.
Quote this message in a reply
12-09-2019, 00:14 AM,
Post: #263
RE: VAS5054A PCB Difference
(11-09-2019, 22:19 PM)toza27 Wrote:  
(11-09-2019, 20:40 PM)no_name Wrote:  I received mine, what I was looking was:
1. ...55F SDRAMs since they were supposed to be working on 5v even they are slower a little bit, but that is ok for me
2. I did not care about OKI, just wanted tool with right diode order and chips
3. I wanted to find one with ORI amb2300

And when I find one that looked like I wanted on pics, I ordered it and received it and connected it via BT and USB to ODSI from virtual, also to Forcar as passthru, but when I opened it I was disappointed, and here are pics so you can now why...

I am right now talking with seller if we dont find agreement I will open a dispute on Ali...
You hawe a good unit for rework. Kan buy a original AMBER 2300 from Ebay, and all ader component from Mouser.
Will be a good unit. For AMB2300 firmware send me a PM.

I installed VAS PC and found that I have 700.2114 error connected to my TJA1054 which i corrected positioned, could it be because of wrong position of the DIODE near by? Does somebody have a clue?
Quote this message in a reply
12-09-2019, 04:21 AM, (This post was last modified: 12-09-2019, 04:52 AM by aka99.)
Post: #264
RE: VAS5054A PCB Difference
no maybe tja 1054at is a fake chip not working. first it is to replace tja with a working done and then to retest in vas pc.then you get new error code....

(12-09-2019, 04:21 AM)aka99 Wrote:  no maybe tja 1054at is a fake chip not working. first it is to replace tja with a working done and then to retest in vas pc.then you get new error code....

read here
Quote this message in a reply
12-09-2019, 16:23 PM,
Post: #265
RE: VAS5054A PCB Difference
(12-09-2019, 00:14 AM)no_name Wrote:  
(11-09-2019, 22:19 PM)toza27 Wrote:  
(11-09-2019, 20:40 PM)no_name Wrote:  I received mine, what I was looking was:
1. ...55F SDRAMs since they were supposed to be working on 5v even they are slower a little bit, but that is ok for me
2. I did not care about OKI, just wanted tool with right diode order and chips
3. I wanted to find one with ORI amb2300

And when I find one that looked like I wanted on pics, I ordered it and received it and connected it via BT and USB to ODSI from virtual, also to Forcar as passthru, but when I opened it I was disappointed, and here are pics so you can now why...

I am right now talking with seller if we dont find agreement I will open a dispute on Ali...
You hawe a good unit for rework. Kan buy a original AMBER 2300 from Ebay, and all ader component from Mouser.
Will be a good unit. For AMB2300 firmware send me a PM.

I installed VAS PC and found that I have 700.2114 error connected to my TJA1054 which i corrected positioned, could it be because of wrong position of the DIODE near by? Does somebody have a clue?
Your TJA1054 is fake, need to be replaced.
Reputation: +1 - aka99 [+1]
Quote this message in a reply
[+] 1 user says Thank You to toza27 for this post
12-09-2019, 18:11 PM,
Post: #266
RE: VAS5054A PCB Difference
this unit is one of the best on the market and you can just change some staff,

also it is just 60$
Quote this message in a reply
12-09-2019, 18:40 PM,
Post: #267
RE: VAS5054A PCB Difference
For original AMB2300 search on Ebay Amber Wireless 2300.
Quote this message in a reply
18-08-2022, 11:24 AM,
Post: #268
RE: VAS5054A PCB Difference
Hi, anyone have the dump file for AM29F160DB ? i will try to fix mine as it dies during the upgrade, not seen in USB , led flash one time once connected to OBD...


Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Odis S 7.2.1 + E 12.2.0 for Vas5054a Win10 Updated2023 Vmware srzar 3 875 20-01-2024, 16:23 PM
Last Post: lalle
  Drivers VAS5054A blue MORKAS 1 280 28-12-2023, 22:46 PM
Last Post: vagvag
  VAS5054A PassThru drivers audi666 6 413 22-12-2023, 09:46 AM
Last Post: audi666
ZTAudi VAS5054A clone drivers HELP Dišovas 4 822 13-09-2023, 10:31 AM
Last Post: Peterwall
  Spotting a good VAS5054a clone interface in 2023 Yonder 9 859 29-08-2023, 08:32 AM
Last Post: audi666
ZVW Latest Odis S and E versions that work with VAS5054A? getaibose 8 1,012 22-07-2023, 17:30 PM
Last Post: audi666
  VAS5054A w. PassThru and Odis Projectns 4 942 03-07-2023, 11:56 AM
Last Post: aaronpaul
  SVCI 6154A vs VCX NANO 6154A vs VAS6154A clone vs VAS5054A codingbmwsofia 14 2,365 27-06-2023, 15:58 PM
Last Post: nigeeemac999
  vas5054a software coder 7 854 14-06-2023, 16:48 PM
Last Post: Tekero
  Difference firmware dq500 drjb 0 207 12-04-2023, 16:25 PM
Last Post: drjb

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content