Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Problem with KL15 in ICOM A1
26-06-2014, 23:04 PM,
Post: #1
|
|||
|
|||
Problem with KL15 in ICOM A1
Hi to all, i have a problem with my ICOM A1 of bmw , with cars before 3/2007 is perfect but with cars of after not recognized KL15 and ISTA/d NOT RUN .....
Somebody know of this problem ?? Thanks you |
|||
01-09-2014, 21:38 PM,
Post: #2
|
|||
|
|||
RE: Problem with KL15 in ICOM A1
I'm good and just have not found the solution yet and I am that m climbing the walls because the seller does not want to make a change ....
|
|||
02-09-2014, 19:56 PM,
Post: #3
|
|||
|
|||
RE: Problem with KL15 in ICOM A1
I've no problems with mine A1 with ista-d.
Your problem can be hardware or software related. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
08-09-2014, 22:49 PM,
Post: #4
|
|||
|
|||
RE: Problem with KL15 in ICOM A1
|
|||
10-09-2014, 22:14 PM,
Post: #5
|
|||
|
|||
RE: Problem with KL15 in ICOM A1
Good because I'm still with this problem have looked at the icom if battery recognizes and acknowledges KL15 and KL30 if both give power but when I try to connect to the car does not connect me tells me not been found in the car ... I read something .. theme pins 1 to 16 but I did and nothing stays the same .... can be the subject of firmware I've tried to do a restore but can not get icom start the restore
|
|||
05-01-2017, 19:06 PM,
Post: #6
|
|||
|
|||
Problem with KL15 in ICOM A1
Sorry for dragging up an old thread but my issue is related to this.
I've bought a new ICOM NEXT and wish to repair my Clone ICOM A1 before I sell it. It works perfectly on Exx without DCAN but it does not see the voltage of KL15 when connected to a DCAN car. It's perfect with Fxx models also. I've got around this problem for years by using K+DCAN cables and so on. But I would like to repair this so that new owner gets full use of the tool. I've heard that it is the CAN Switching not working on the ICOM. Can anybody help? Thank you. |
|||
10-01-2017, 06:20 AM,
Post: #7
|
|||
|
|||
RE: Problem with KL15 in ICOM A1
Let me know when ull be selling ur icom pls
also where did u get icom next? |
|||
10-01-2017, 15:01 PM,
Post: #8
|
|||
|
|||
Problem with KL15 in ICOM A1
I bought ICOM NEXT from BMW dealer. It arrived today.
I only bought 'Part A' as that's all I need. B/C/D are easily available too |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content