Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
C4 It does not turn on
02-05-2019, 21:18 PM,
(This post was last modified: 02-05-2019, 23:14 PM by Clusters.)
Post: #1
|
|||
|
|||
C4 It does not turn on
Hi, I want to ask you a question. I got a model 2019 bus ol16 / 45. the fact is that I was able to scan buses with the day only with version 07/2016, the problem with the bus 2019 does not turn on the scanner, and check voltages and these are the ones that have marked me.
pin 1 N/A pin 2 N/A pin 3 N/A pin 4 ground pin 5 signal ?Can Pin 6 Can H pin 7 23V pin 8 25V pin 9 signal ? pin 10 N/A pin 11 N/A pin 12 N/A pin 13 N/A pin 14 Can L pin 15 signal ? pin 16 25V someone has the same problem that has resolved he's just out of agency |
|||
06-05-2019, 17:29 PM,
Post: #2
|
|||
|
|||
RE: C4 It does not turn on
test if the C4 works on 12 V C4 is toooo old for 2019 bus
|
|||
06-05-2019, 20:00 PM,
Post: #3
|
|||
|
|||
RE: C4 It does not turn on
(06-05-2019, 17:29 PM)obdcloud Wrote: test if the C4 works on 12 V C4 is toooo old for 2019 bus It does not take much to scan a model of 2016, it is also 24V, the detail of 2019 is that the pins are not where they should be, for example I understand that pin 5 is ground, but this has a signal similar to the CAN signal, and does not turn on the scanner |
|||
08-05-2019, 13:32 PM,
Post: #4
|
|||
|
|||
RE: C4 It does not turn on
(06-05-2019, 20:00 PM)micores Wrote: does not turn on the scanner Check fuses on vertical board (one with connector on) I don't have a clue, but let me play more clever
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content