[quartaporter]

hi all,
i retrofitted 3q0 lane assist camera to my tiguan 1.4 tsi  122 hp 4x2 manuel caxa engine,  i bought  camera from ali express , seller profile was good for camera , then camera came Sw G 0231 , i put the car, all 03 ,44 ,a5 ,09 codes ok and calibration is ok too , no vcds error exist, but  steering wheel not take control ,  like in my video, i think there is  no compatible block in my car. then i updated camera  G-->H--->L  sw0610 ,i updated vcp 0610 parameter with error, odis-e parameter not worked too, can anyone help me about these
..


https://www.youtube.com/watch?v=wm4Leyy5rfc

[spacewalker]

that camera must be calibrate,

[quartaporter]

that camera must be calibrate,

i calibrated too many times. result in picture, it was perfect, i got error when parameter xml updating with vcp,
then in picture advanced measured valıu, camera not gets dynamic calibration, no traffic sign works , no hba works,


please help

[juppep]

Just did this same procedure successfully, use "erase memory"

[ufo222]

that camera must be calibrate,

i calibrated too many times. result in picture, it was perfect, i got error when parameter xml updating with vcp,
then in picture advanced measured valıu, camera not gets dynamic calibration, no traffic sign works , no hba works,


please help

What are your mistakes?[VCDS]

[driver975]

your problem is solved?
i think i can help for you