Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

IDS questions
04-07-2014, 16:07 PM,
Post: #21
RE: IDS questions
(29-06-2014, 16:31 PM)Renopower Wrote:  I mean does it work with later versions as ids 86 ?

Yes it will

you can install v86 and use ids for diagnostics

but calibration files you need to take from v81 because after this the calibration files only work online.
Quote this message in a reply
[+] 2 users say Thank You to TizWoz for this post
08-07-2014, 12:48 PM, (This post was last modified: 08-07-2014, 12:53 PM by Adam0773.)
Post: #22
LFord  RE: IDS questions
Here you will find a page where you can download the Calib ... File
If you know which file you have to download
You can have it with Technical Bulletin for the change Caliration in Automobiles Ford
North America working 100%

No need to install a New Version IDS any old CALIBRATION IDS V81

Pass only PM

Here you will find a page where you can download the Calib ... File
If you know which file you have to download
You can have it with Technical Bulletin for the change Caliration in Automobiles Ford
North America working 100%

No need to install a New Version IDS any old CALIBRATION IDS V81

Pass only PM


Attached Files
CALIB FILE.rar
File Type: .rar
Downloaded: 55 times
Size: 189 bytes

Quote this message in a reply
[+] 8 users say Thank You to Adam0773 for this post
08-07-2014, 13:41 PM,
Post: #23
RE: IDS questions
Here is the site without any pass by pm. : http://www.motorcraftservice.com/vdirs/w...roduct=IDS

still cannot understand why some ppl's ask about pm,cause not their merits ,Ford have a official download page
Quote this message in a reply
[+] 8 users say Thank You to coriducu for this post
08-07-2014, 13:48 PM,
Post: #24
RE: IDS questions
[quote='coriducu' pid='50501' dateline='1404826869']
Here is the site without any pass by pm. : http://www.motorcraftservice.com/vdirs/w...roduct=IDS

still cannot understand why some ppl's ask about pm,cause not their merits ,Ford have a official download page
[/quot
Quote this message in a reply
[+] 4 users say Thank You to Adam0773 for this post
25-02-2016, 20:40 PM,
Post: #25
RE: IDS questions
At present date, which is lastest Ford Ids Version is able to work with VCM1?
thanks
Quote this message in a reply
25-02-2016, 22:04 PM,
Post: #26
RE: IDS questions
(25-02-2016, 20:40 PM)viejomatius Wrote:  At present date, which is lastest Ford Ids Version is able to work with VCM1?
thanks

I tried 96.01 and worked well. I didn't try upper, but I think it will work with any latest versions.
Quote this message in a reply
[+] 2 users say Thank You to fusername for this post
27-04-2016, 09:37 AM,
Post: #27
RE: IDS questions
What the latest version of IDS Ford and Mazda will work with the VCM Rotunda without VMware?
Thanks for your advices.
Quote this message in a reply
03-02-2017, 13:22 PM, (This post was last modified: 03-02-2017, 13:25 PM by tito-sainz.)
Post: #28
RE: IDS questions
Hello friends
To forgive for if this is not the specific thread for the problem that I have, although I have not seen any that more or less speak of him.

My problem is the following, I have an original VCM I, with IDS 86.01A and V81 calibration, when scanning all the modules to read DTC'S, it only shows me the PCM module and the IC, (motor, and box instruments), but The airbag module (RCM) although it does not recognize it, however with Autocom if and I can read DTC. In the installation of the airbag module, it is observed that it carries a module cable (RCM) to the OBD, and it does not go through the CAN line.

Vehicle ford Tourneo Connect year 2007

What do I do wrong or what problem can I have in the configuration of the IDS program or the VCM I interface?

Thank you for your attention
Quote this message in a reply
03-02-2017, 16:34 PM,
Post: #29
RE: IDS questions
IDS VCM one I still working as of today IDS is 104.1
If you VCM is a clone I wouldn't recommend trying to update as it may kill the VCM
Quote this message in a reply
03-02-2017, 16:39 PM,
Post: #30
RE: IDS questions
(03-02-2017, 16:34 PM)ryanb4200 Wrote:  IDS VCM one I still working as of today IDS is 104.1
If you VCM is a clone I wouldn't recommend trying to update as it may kill the VCM


Where did you get 104.01 and if you have it can you upload it ?
Quote this message in a reply


Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content