IDS questions

***tito-sainz*** · (This post was last modified: 01-03-2017, 17:06 PM by tito-sainz.)

Hello again friends
Previously I wrote a post saying the problem I had with my VCM 1 original Rotunda, and mattydr67 proposed that I look at the Pcb of my VCM, I disarm it and I saw that they were green both, as I said I could not communicate with the Airbag module , And I have tried with other vehicles (of course Ford), and when they do not have CAN BUS, it does not come to anything.

Apart from the attention of Mattydr67, I would like to know if any of you have done the same and if you have solved it, could you indicate how

I have installed V86 IDS and V81 Calibration

I would be very grateful

***mattydr67*** · (This post was last modified: 28-02-2018, 02:25 AM by mattydr67.)

If I didn't told you yet how I solved the issue as yours. I changed the entire PCB. After I tried everything. In my opinion this issue must be in the PCB. Maybe I am wrong. Its just a thought because no one have a solution for this.
Good luck

Hereit is the PCB I changed

***wakawaka*** · 05-03-2017, 07:07 AM,

My battery voltage is 12.5V, every time I try to set programmable parameters in IDS....error low battery. IDS rejects, and I have to manually select the next options to set parameters.
why do I have this error ? , 12.5V is a strong battery...

31-01-2018, 11:44 AM,

Please Help!
In IDS engineering mode (code 60274) in the list there are no Ford Explorer U502. If I put in my VIN - error window "VIN out of range. The range is to ." How can I pick my Explorer (U502)? adore

21-02-2018, 13:22 PM,

Tell me please how could I flash the calibration with IDS to my ACM module having a VIN number from another car (younger for 2 years)?
Or how to convince the IDS that on the vehicle communication interface is connected not mine but another car? dontknow

***Drazick*** · 27-02-2018, 15:05 PM,

Is it possible to use engineer mode (60274) in Mazda IDS?

Or is it just for Ford IDS?

***mexanico1971*** · 01-03-2018, 03:23 AM,

(31-01-2018, 11:44 AM)jezus Wrote: Please Help!
In IDS engineering mode (code 60274) in the list there are no Ford Explorer U502. If I put in my VIN - error window "VIN out of range. The range is to ." How can I pick my Explorer (U502)?

Hi
how do you know what model is eg" U502 " ?
I have one ford fiesta from 2009 , what model is ? how to check ?

thank"s in advance

Brs

01-03-2018, 07:45 AM,

(01-03-2018, 03:23 AM)mexanico1971 Wrote: Hi
how do you know what model is eg" U502 " ?
I have one ford fiesta from 2009 , what model is ? how to check ?

thank"s in advance

Brs

Yours is Ford Fiesta Mk VI (B256/B257/B376) 2002–14 or Mk VII (B299/B409) 2008-11
On this site http://autocade.net/index.php/Ford_Fiest...Skwd7sr.97

Contact Us