Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Op-Com Repair Tool
16-06-2014, 09:16 AM,
Post: #11
RE: Op-Com Repair Tool
Mate you cannot do it
Don't waist your time
Original softwares cannot be activated.
It is need online activation and a genuine tool too
HQ clone can works with lastest op-com/vaux-com softwares ( the lastest firmware for english version is 1.60 )
This is the only one possibility to have the lastest version of op-com working
The lastest version of softwares that it works with any clone it is VAUX-COM 120309a and it was shared here
By the way if your tool it was bought recentlly as 1.45 then open it up and see if it has PIC18F458 original Microchip
If it has a MCU that it is write anything else diffrent on it or it then do not try to upgrade or downgrade it. You'll block it
Good luck
Reputation: +2 - titoun [+1] , pictorino [+1]
Quote this message in a reply
[+] 14 users say Thank You to mattydr67 for this post
16-06-2014, 23:09 PM,
Post: #12
RE: Op-Com Repair Tool
(16-06-2014, 09:16 AM)mattydr67 Wrote:  Mate you cannot do it
Don't waist your time
Original softwares cannot be activated.
It is need online activation and a genuine tool too
HQ clone can works with lastest op-com/vaux-com softwares ( the lastest firmware for english version is 1.60 )
This is the only one possibility to have the lastest version of op-com working
The lastest version of softwares that it works with any clone it is VAUX-COM 120309a and it was shared here
By the way if your tool it was bought recentlly as 1.45 then open it up and see if it has PIC18F458 original Microchip
If it has a MCU that it is write anything else diffrent on it or it then do not try to upgrade or downgrade it. You'll block it
Good luck

Hello mattydr67,

Thank you for your post. Yes i have a 18LF458 Microchip. Is that means i can upgrade and use 131223c ? Can you show me how?

I have 1.45FW and i can use 120309a. but as you know i am trying hard to use 131223c.
Quote this message in a reply
17-06-2014, 03:59 AM,
Post: #13
RE: Op-Com Repair Tool
Hi again
You ask: "Yes i have a 18LF458 Microchip. Is that means i can upgrade and use 131223c ?"
- If your tool is opcom v5 hardware with real Microchip PIC18F458 then the tool need to be upgraded to the HQ clone to be able to use moded softwares for it as 131223c or 131223d
This tool support firmware upgrade/downgarde
To upgrade this tool to become a HQ clone it is need to be flashed
You ask "Can you show me how?"
I belive that it is not such a easy.
The easiest way is to buy a HQ clone
Good luck
Quote this message in a reply
[+] 6 users say Thank You to mattydr67 for this post
17-06-2014, 05:59 AM,
Post: #14
RE: Op-Com Repair Tool
(17-06-2014, 03:59 AM)mattydr67 Wrote:  Hi again
You ask: "Yes i have a 18LF458 Microchip. Is that means i can upgrade and use 131223c ?"
- If your tool is opcom v5 hardware with real Microchip PIC18F458 then the tool need to be upgraded to the HQ clone to be able to use moded softwares for it as 131223c or 131223d
This tool support firmware upgrade/downgarde
To upgrade this tool to become a HQ clone it is need to be flashed
You ask "Can you show me how?"
I belive that it is not such a easy.
The easiest way is to buy a HQ clone
Good luck

I can do soldering and flashing but i need hex and moded softwares 131223c or 131223d. And i can not find anywhere
Quote this message in a reply
17-06-2014, 06:23 AM,
Post: #15
RE: Op-Com Repair Tool
And you'll not find it anywhere mate
There's no an uniq hex file for this.
Belive me take my advise and don't waist your time
It is not as you think
Buy a HQ clone and you'll smile then
Good luck
Quote this message in a reply
[+] 4 users say Thank You to mattydr67 for this post
16-05-2015, 09:15 AM,
Post: #16
RE: Op-Com Repair Tool
I just bought 2 on e-bay and they have the new opcom board and I have flashed them to latest 1.59.
Quote this message in a reply
16-05-2015, 14:15 PM,
Post: #17
RE: Op-Com Repair Tool
Don't say "the lastest"
The lastest firmware for 131223 version is fw1.61
And the lastest firmware now is fw.1.64
Good luck
Quote this message in a reply
[+] 1 user says Thank You to mattydr67 for this post
27-05-2015, 20:57 PM,
Post: #18
KOpel  RE: Op-Com Repair Tool
Hello,

does anyone have the firmware 1.64 for the hq-clone?

Thanks.
Quote this message in a reply
28-05-2015, 06:20 AM,
Post: #19
RE: Op-Com Repair Tool
If you are using the last opcom 150406b then when you will try to connect to a car the software will upgrade automatically the firmware of your tool
Good luck
Quote this message in a reply
28-05-2015, 07:05 AM,
Post: #20
KOpel  RE: Op-Com Repair Tool
It's the new Version, but it says "Please connect Interface to usb-port or install Driver".
The newest Drivers, which come with the Software are installed and Interface is connected to the Computer. think
Now i want to try flashing the new Firmware With ocflash.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
KOpel REPAIR ERASED OP-COM CLONE BOOTLOADER FROM PIC18F458 MCU fantomel 190 133,491 17-11-2023, 12:03 PM
Last Post: mattydr67
  GM MDI2 REPAIR EXPERIENCE 12manux 1 224 03-10-2023, 19:24 PM
Last Post: apol
  OP-COM v6 with "fake MCU" REPAIR obdstart 111 54,095 26-10-2022, 19:35 PM
Last Post: mattydr67
  Opcom Bootloader Repair with TL866 ICSP port aki1 3 1,621 07-10-2019, 13:07 PM
Last Post: avepla
  opcom clone need help to repair autosolutions 1 814 18-09-2019, 02:40 AM
Last Post: mattydr67
  Opel meriva 1.6 xe ecu repair help davor.touch 5 2,836 03-05-2017, 08:43 AM
Last Post: dil6222
KOpel Flashing tool drovid 1 1,225 07-04-2017, 14:45 PM
Last Post: georgea
KOpel Corsa C,central locking not working-BCM repair(SOLVED) grmsek.damjan 0 2,195 16-06-2015, 08:02 AM
Last Post: grmsek.damjan
  Y17DT repair cicko 1 1,296 12-06-2015, 08:10 AM
Last Post: domelec

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content