[mamujim]

Hi all,

What was the last version of ISTA/P to support F series programming ?
And if someone can send a link that would be greatly appreciated.

many thanks in advance.

[SweetBMW]

Last version was 3.64.002, this had all F series support. Now 3.66 only has F01 and RR.

I have no link unfortunately.

[mamujim]

Last version was 3.64.002, this had all F series support. Now 3.66 only has F01 and RR.

I have no link unfortunately.

having a quick read, we need an IBAC  code from BMW to enable F series programing in 3.64.
is there any other way to get it working?
or which version can we use where we don't need IBAC code?

thanks again

[Bimmer540]

Last version was 3.64.002, this had all F series support. Now 3.66 only has F01 and RR.

I have no link unfortunately.

having a quick read, we need an IBAC  code from BMW to enable F series programing in 3.64.
is there any other way to get it working?
or which version can we use where we don't need IBAC code?

thanks again

You can use Ibac-Generator software, or you can use in Ista-p loader (under i --> Tools--> IBAC Code Generator

[mamujim]

thanks both, will give it a try

[bimmer71]

[62.0 was last w/o an ibac code needed to program f ,g and I series , no link sorry, there is a guy whom has complied a mixed version , with need data for newer  cars call it pilot version 3.67 I believe in selling part of this side , I was going  try the same but who has the time :good luck .