Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help setting up spftware for Navigation codes
07-07-2014, 12:12 PM,
Post: #1
|
|||
|
|||
Help setting up spftware for Navigation codes
Hi guys,
Thanks in advance for reading this topic. I'm quite new in this forum and wanted to start doing something. I think I have downloaded all the software needed for generating my codes for a Navigation map upgrade. So as far as I understood my main steps are: 1.- get my 1b/de file from the car (using the ODB2 - Ethernet cable and SWID reader). I am not sure which software is needed below the SWID reader, since it references EDIABAS folder to replace some prg files. I already set up E-Sys (even I don't know if it is required for my purposes). 2.- Use NBT.exe and the file generated in the previous step in order to build the final code (after b64 decoding the 1b/de file). Are my assumptions right? Any advice, guide or document to follow? I already tried to search the forum, but as I'm quite new to the forum and these technologies its getting hard to perform the right search. Regards, |
|||
17-08-2014, 22:14 PM,
Post: #2
|
|||
|
|||
RE: Help setting up spftware for Navigation codes
I'm missing what kind of navigation.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
29-08-2014, 20:46 PM,
Post: #3
|
|||
|
|||
RE: Help setting up spftware for Navigation codes
Yea you need to extract DE or 1B with swidreader or e-sys after you can generate map update´s with this fsc
Check this: http://www.youtube.com/watch?v=DLmFvFGCFcE |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content