[mattydr67]

Hi
How do you think that you can read the FTDI dump?
Do you think at MProg?
Good luck

[shaggy]

...but I need ftdi dump and...
Does anyone have it all?

not for your interface
the extra bits are different for each opcom interface

[Bimmeristi]

So, story short
China clone V5 the one with real PIC18F458 works with 08 2010 china.
This one , write ftdi with ept from vaux-com 2012 thread and upgrade flash with ocflash to 1.45 and it will work with VAUXCOM120309a
Also this one can be transformed in a "HQ" clone if you modd ftdi dump with some extra bits and then you will be able to run it with modified software for hq clone with fw: ro-1.47 ; op-com 131223cen 1.59 or vaux-com 131223d 1.60.
Also as i have seen on another forum this clone B/B+ can be modded to support CHSCAN and like this will be transfomed to C/C+

Very interesting story.
I am ready to sacrifice my OPCOM, but I need ftdi dump and modified software for hq clone.
Does anyone have it all?

Me too, i'll have two op-com.... So i can test also...

---

Yes, now version 120309a( car up to 2012) working in desktop(no car to test with) But software starting and is activated + firmware updated via software.

[stmilosh]

Very interesting story.
I am ready to sacrifice my OPCOM, but I need ftdi dump and modified software for hq clone.
Does anyone have it all?

Dump, or only serial to be precise (correct FTDI descriptor is know) won't help you because it is a "hash" so to speak generated in HQ clone wrapper/checker from FTDI and PIC ID.
You can't guess algorithm from 8 bytes of cypher text and plain text. No one can. You need to disassemble HQ checker for that.

[McMihai]

                   

op com dump ftdi.txt
File Type:
Downloaded:	328 times
Size:	53 bytes

Hi
How do you think that you can read the FTDI dump?
Do you think at MProg?
Good luck

FTDI dump .... Fake HQ Opcom Clone waux 13...
old op-com china clone 8-2010

I hope it's useful for something,

[RuLe]

I own opcom marked v5, year 07, I can convert it to hq to use the latest versions of opcom?

How can I do?

[fantomel]

For now you can only use vaux com 2012 and also you can repair bootloader because you have real pic in your op-com.

[avepla]

I have a date to HQ interface opcom, FW 1.64 that works with the modified software 150406b. I configured a "revision C" my question is do I access CAN CH with the same hardware or need a new adapter ?. thanks

[mattydr67]

All clones are Rev B so for Ch-CAN you need Rev C adaptor
Otherwise you can only set it but you cannot connect CH-CAN controlers that are on pins 12-13
Good luck

[alibabavl64]

Is possible too to modify a B interface v5 from B rev to C rev.