[keyzex]

My cable No. 42 has red-brown-black-orange, and the pluses and minuses.
But the description of the Volvo S80 HC08 says that I should use, gray-green-white.
Anyone know how it must be to make it work?

[darek_naprawa]

25 pin connector
1 grey, Condensator 10nF
6 blue
9 green
13 black
20 white
25 red
Grey is a bridge

[keyzex]

Thanks for the reply, but I was not wiser.

See the picture on my cable, the black and red with a condenser is to pin 1-14.

But the colors of the other is not true at all, is brown = green orange = white?

That's my problem I think.

I'm beginning to think that Digipro is scrap, I could read out the mile with Tacho pro today, but it could not save the new mil.
With Tacho pro, I used cable 35.

Is there anyone who has managed to change mileage on Volvo with Digiprog Chinese copy?
Can I use cables from Tacho Pro to Digipro? They are, after all, marked right.

I hate losing to the technology.

[darek_naprawa]

Often digiprog not read Motorola hco8.

[pietje001]

Colours in manual of digiprog are different than the colours of the wires of your cable.

white is black
green is brown
red is red
black is orange.

(in attachment are all color switches of all cables).

carprog (60usd in china) should be able to do your volvo over obd.
(next week I try carprog on volvo s80 2001, I can tell if it works)

[keyzex]

Thank you, now I'll try again.
But would be very grateful for a report when you've tried carprog at Volvo.

[darek_naprawa]

Try digiprog but rather not do, digiprog not read HC08. Carprog volvo does the obd a1 +. HC08 can read and work file a counter 4.8

[keyzex]

Yes I have given up Digiprog.

Hoping for a good outcome of Carprog.

There's cheap Carprog at AliExpress, I already have so many tools so one more will not hurt.

[pietje001]

Sorry, carprog clone won't work.. i've tried.

and informed, you need original carprog

[darek_naprawa]

Maple also works, does not need to be ori.