Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Load any FSC set into any KAFAS2 ECU for free
10-07-2019, 06:47 AM,
Post: #11
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
[/quote]
Did you write FSC Code VIN to KAFAS? Are you specifying VIN on E-Sys Import Screen that matches the FSC Code VIN, not car VIN? [/quote] Yes I did that for sure, I can see that donor vin appeared in TAL log too, so I am certain they had been entered correctly. |
|||
10-07-2019, 19:41 PM,
(This post was last modified: 10-07-2019, 19:44 PM by DayvG.)
Post: #12
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
(10-07-2019, 05:53 AM)shawnsheridan Wrote:(10-07-2019, 05:42 AM)jackylooo Wrote: Below is the error I got after I followed the step described in the post: So, to make things further confusing. My original KAFAS2, I just flashed to latest ilevel leaving CDdeploy unchecked. On completion I injected CAFD and VO coded, I then check FSC status in comfort mode, all accepted. In expert mode I readdatabyidentifiervin, decode the HEX and it’s my vehicle VIN for my car, not FSC VIN! Check FSC status again, all accepted! I’m not going to play any further as everything is working as it should. I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
10-07-2019, 22:48 PM,
Post: #13
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
Thanks for update.
So looks like this method can only work with car equipped with CAS? I tried in 2017 F36 but it just returned FGN_CHECK_FAILURE. |
|||
10-07-2019, 22:52 PM,
(This post was last modified: 10-07-2019, 22:53 PM by DayvG.)
Post: #14
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
You think that CAS has something to do with it? I don’t know enough to comment, why do you think this is? This time I didn’t have to do any FSC work or loading, they just remained accepted after I injected CAFD and VO coded. They are accepted even though my own VIN is shown when reading VIN using the readdatabyvinidentifier. All very strange, but I feel lucky!
(10-07-2019, 22:48 PM)jackylooo Wrote: I tried in 2017 F36 but it just returned FGN_CHECK_FAILURE. What is FGN check failure? I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
10-07-2019, 23:30 PM,
Post: #15
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
Has anyone else tried with a FEM module yet? I still have no way to test I'm waiting for parts to start the retrofit. the ECU I just bought brings active 5AD and 5AG and I even wanted it to be the front collision but I'm not sure what it is. in other forums say that it is 5AS and others that the 5AD also does front collision.
Thanks |
|||
10-07-2019, 23:39 PM,
(This post was last modified: 10-07-2019, 23:40 PM by DayvG.)
Post: #16
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
(10-07-2019, 23:30 PM)Pedrom92 Wrote: Has anyone else tried with a FEM module yet? I still have no way to test I'm waiting for parts to start the retrofit. the ECU I just bought brings active 5AD and 5AG and I even wanted it to be the front collision but I'm not sure what it is. in other forums say that it is 5AS and others that the 5AD also does front collision. What car do you have? I think it depends on what vehicle you have. For example F46 vehicles with KAFAS don’t have SLI 8TH available as an option to VO code however it can be enabled with FDL coding. If you read the FA on your vehicle then edit it you can add 5AD/5AG to you SALAPA. After you do that you can calculate FP, I’m sure if it’s not an option you will get an error message. In my F10 3AG rear parking cam isn’t an option but 3AH is. Therefore depending on you vehicle you could have drive assist plus 5AS or drive assist plus with ACC 5AT, or Lane Depart departure warning 5AG. The single options would be available in some vehicles as part of a package, or individually in others. You can do a lot with Esys without the modules if you want to sit and play. Also, 5AG is not KAFAS/FSC related and relies on sensors behind rear bumpers. I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
11-07-2019, 10:13 AM,
Post: #17
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
My car is BMW F31.
|
|||
16-07-2019, 23:18 PM,
Post: #18
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
Hi guys,
i'm retrofitting kafas2 to enable sli, active cruise control etc (it's bmw i3). All FSC according to esys are accepted but kafas2 haven't been coded to vehicle. if i code it did i lose fsc status accepted? Thank you for your help. Thanks
|
|||
17-07-2019, 00:42 AM,
Post: #19
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
l
(16-07-2019, 23:18 PM)kubixix Wrote: Hi guys, Don’t worry, it will remain accepted. |
|||
Reputation: +1 - DayvG [+1] | |||
17-07-2019, 15:56 PM,
Post: #20
|
|||
|
|||
RE: Load any FSC set into any KAFAS2 ECU for free
(17-07-2019, 00:42 AM)jackylooo Wrote: l(16-07-2019, 23:18 PM)kubixix Wrote: Hi guys, Can I use function WDBI to write my VIN to kafas or something can happen with FSCs? Thanks
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
bmw kafas2 fsc repair kit | robiukaz1 | 154 | 23,034 |
15-05-2024, 17:03 PM Last Post: XALLECS |
|
How to code hands free driver assistant (G-series) | btvaleks | 21 | 5,625 |
14-05-2024, 07:27 AM Last Post: btvaleks |
|
MS4X EWS Delete Free | alsamaraee | 4 | 715 |
07-04-2024, 22:15 PM Last Post: mecadriano |
|
Cas 3+ Editor Free to use | budddyyy | 8 | 1,051 |
25-03-2024, 11:24 AM Last Post: jaki |
|
CAS 2 Editor Free to use | budddyyy | 1 | 347 |
11-03-2024, 10:36 AM Last Post: foxportal |
|
BMW Price-List 2024-01 FREE FOR ALL | SerJ-R | 2 | 434 |
17-01-2024, 17:34 PM Last Post: SerJ-R |
|
G20 5A4 Glare free high beam assistant | RuleNormaliai | 1 | 270 |
23-11-2023, 22:02 PM Last Post: krolig |
|
kafas2 camera replacement | jararak | 4 | 391 |
22-11-2023, 13:34 PM Last Post: Powerlab |
|
Fsc reject Kafas2 | Jalami | 2 | 391 |
19-11-2023, 09:51 AM Last Post: Thorsten |
|
Coding Tailgate Free contact (Retrofit) | ruben_17non | 2 | 318 |
27-10-2023, 09:08 AM Last Post: ruben_17non |
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content