Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
How to solve the problem of hot start
16-07-2014, 12:21 PM,
Post: #1
|
|||
|
|||
How to solve the problem of hot start
Hello, how to solve the problem of hot start to vag-group?
If I helped you, press "Thanks" + Rep
|
|||
19-07-2014, 14:41 PM,
Post: #2
|
|||
|
|||
RE: How to solve the problem of hot start
Upload the file and I "fix it"
|
|||
19-07-2014, 14:45 PM,
Post: #3
|
|||
|
|||
RE: How to solve the problem of hot start
Discount for CarTechnology forum members , 500 000 EVC reseller projects.
You can register on our File Service CLICK HERE FOR FILE SERVICE |
|||
09-06-2015, 18:19 PM,
Post: #4
|
|||
|
|||
RE: How to solve the problem of hot start
(16-07-2014, 12:21 PM)naphosim Wrote: Hello, how to solve the problem of hot start to vag-group? the hot start fix in only available to some 1.9 TDI engines prior to 2007 where the problem is fixed by vw by self learning adaptations. To hot fix a 1.9 TDI (eg: BKC) you need to access engine controller and gain access by inputting a login/access code. For BKC is 12233 In the VCDS adaptation section you need to find IQ (injection quantity), usually channel 001. Increase it slowly by 50 units and observe the differences. |
|||
18-04-2016, 12:38 PM,
Post: #5
|
|||
|
|||
RE: How to solve the problem of hot start
Older edc15 you can copy value from cold start map to hot start map
when you open map you can see that top value are blank, they need filling in |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content