Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

How to fix hot start in vag group?
17-07-2014, 17:02 PM,
Post: #11
RE: How to fix hot start in vag group?
Not all cars will be ok with vag-com procedure, only a few. remap is the best solution

No help for people not give a feedback
Quote this message in a reply
17-07-2014, 17:30 PM,
Post: #12
RE: How to fix hot start in vag group?
Mabe someone can upload some solution? it will be nicesmile
Quote this message in a reply
17-07-2014, 18:33 PM,
Post: #13
RE: How to fix hot start in vag group?
(17-07-2014, 10:36 AM)naphosim Wrote:  
(17-07-2014, 09:36 AM)cuiuda Wrote:  Hi.
Proceed as follows:
Security Access >> 12233 >> Adaptation >> Ch 01 >> write value 300 >> do it

hi,
procedure is the same for EDC15?

EDC15 PD just as you do and it works. For VP unfortunately not.
Only the value of 300 is an exaggeration, as I've done enough 50-100.
Quote this message in a reply
[+] 2 users say Thank You to darek_naprawa for this post
17-07-2014, 18:41 PM,
Post: #14
RE: How to fix hot start in vag group?
(17-07-2014, 17:30 PM)damian475 Wrote:  Mabe someone can upload some solution? it will be nicesmile

post a file that you want to be remaped

No help for people not give a feedback
Quote this message in a reply
17-07-2014, 20:05 PM,
Post: #15
RE: How to fix hot start in vag group?
(17-07-2014, 17:02 PM)loki954 Wrote:  Not all cars will be ok with vag-com procedure, only a few. remap is the best solution

You're right. I always use remap solution.
At EDC15 (ALH, AFN, AJM, etc) read 27c010 or 28f400 with a programmer, on bench, then rewrite the modified map for HotStart.
Don't work via OBD.

LE
@damian
I don't think someone will give you the solution.
Quote this message in a reply
18-07-2014, 07:37 AM,
Post: #16
RE: How to fix hot start in vag group?
(17-07-2014, 20:05 PM)cuiuda Wrote:  
(17-07-2014, 17:02 PM)loki954 Wrote:  Not all cars will be ok with vag-com procedure, only a few. remap is the best solution

You're right. I always use remap solution.
At EDC15 (ALH, AFN, AJM, etc) read 27c010 or 28f400 with a programmer, on bench, then rewrite the modified map for HotStart.
Don't work via OBD.

LE
@damian
I don't think someone will give you the solution.

why not wink it is free on the net smile

No help for people not give a feedback
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Macan cold start deactivation Stammba 0 40 26-03-2024, 07:40 AM
Last Post: Stammba
ZTAudi Solved ✔ Hi please start stop off md1cp004 audi a6 robus007 6 169 20-03-2024, 16:28 PM
Last Post: robus007
XZBMW BMW F30 330i Cold Start off suckatall 0 72 12-03-2024, 07:51 AM
Last Post: suckatall
ZTAudi EDC17cp14 Crank no start after tune Ninety 4 163 04-03-2024, 15:55 PM
Last Post: Ninety
  Volkswagen Tiguan Allspace Start Stop OFF Radco555 1 88 01-03-2024, 11:46 AM
Last Post: Jurebv
XZBMW ZF 8hp BMW start gear zyura 2 193 22-02-2024, 13:53 PM
Last Post: zyura
KOpel Opel Vectra C 1.9 CDTI Z19DT Cold Start Fix VAGFlex 1 116 11-02-2024, 09:48 AM
Last Post: martink550
  Peugeot md1cs003 after adblue off cant start and p3028 baatouz 7 333 10-02-2024, 19:19 PM
Last Post: baatouz
ZVW VW Bora 1.9TDI 2002 y. hard start when engine is warm aidasystemsbg 3 189 08-02-2024, 16:25 PM
Last Post: Patrik S
  fiat 500 start stop off dadoa4 0 86 08-02-2024, 15:18 PM
Last Post: dadoa4

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content