Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Siemens MSS65 BDM100 Clone Problem
26-07-2019, 19:25 PM,
(This post was last modified: 26-07-2019, 19:42 PM by Clusters.)
Post: #1
|
|||
|
|||
Siemens MSS65 BDM100 Clone Problem
Hello
I got a problem with a BMW M5 Siemens MSS65. I wanted to clone it to a identical MSS65. First Step: I read the MSS65 with xprog without any Problem (both cpus). I got CPU1 (MPC, Config A, Flash) and CPU2 (MPC, Config A, Flash) Then I erased and wrote all the File into new MSS65. But the car wont start. Inside Config A in both CPUs there wasnt any information (only 00 00 00 and FF FF FF FF) Now I am trying to read the ECU again with a BDM100 Clone: I read alot BOSCH EDC16 Units with it. Now the Problem is. As I know the Clone has a different pinout. And I dont know where the VF0 VF1 and RESET is. Picture Original Pinout BDM: https://www.google.com/search?q=bdm100+p...Y9a0yIL3M: Picture Clone Pinout: https://www.google.com/search?q=bdm100+p...A2GCpL51M: |
|||
26-07-2019, 23:23 PM,
(This post was last modified: 26-07-2019, 23:27 PM by Enabled.)
Post: #2
|
|||
|
|||
RE: Siemens MSS65 BDM100 Clone Problem
Does your read file contain proper data?
|
|||
27-07-2019, 06:04 AM,
(This post was last modified: 27-07-2019, 06:08 AM by ExiizZ.)
Post: #3
|
|||
|
|||
RE: Siemens MSS65 BDM100 Clone Problem
(26-07-2019, 23:23 PM)Enabled Wrote: Does your read file contain proper data? Actually I do not know much about the inside of this files. Usually I am just copying and it worked always. Could you explain me how to check or can I send you the files? (26-07-2019, 23:23 PM)Enabled Wrote: Does your read file contain proper data? Actually I do not know much about the inside of this files. Usually I am just copying and it worked always. Could you explain me how to check or can I send you the files? |
|||
27-07-2019, 12:07 PM,
Post: #4
|
|||
|
|||
RE: Siemens MSS65 BDM100 Clone Problem
I would open the read files with a hex editor like HxD and scroll through to make sure they contain data.
|
|||
28-07-2019, 15:45 PM,
Post: #5
|
|||
|
|||
RE: Siemens MSS65 BDM100 Clone Problem
(27-07-2019, 12:07 PM)Enabled Wrote: I would open the read files with a hex editor like HxD and scroll through to make sure they contain data. Oh yes sure I already did that with HxD and there is Data. I also found the VIN inside. Only the Configuration A is empty in both Cpus. But in another Thread someone upload his files and even his config A's were empty |
|||
02-08-2019, 13:43 PM,
Post: #6
|
|||
|
|||
RE: Siemens MSS65 BDM100 Clone Problem
(28-07-2019, 15:45 PM)ExiizZ Wrote:(27-07-2019, 12:07 PM)Enabled Wrote: I would open the read files with a hex editor like HxD and scroll through to make sure they contain data. I think 1 of cpu did not read properly.. but did you try make diagnostic on ecu or yust start the car? post files and we check |
|||
02-08-2019, 13:49 PM,
Post: #7
|
|||
|
|||
RE: Siemens MSS65 BDM100 Clone Problem
if car update ecu with ista P new version i think from 2013 boot loder clossed not more posible read left processor.
BR eddi |
|||
03-08-2019, 02:33 AM,
Post: #8
|
|||
|
|||
RE: Siemens MSS65 BDM100 Clone Problem
I think only mss60 was bdm locked for one processor. Mss65 was left open, as far as I know.
|
|||
19-08-2019, 21:05 PM,
Post: #9
|
|||
|
|||
RE: Siemens MSS65 BDM100 Clone Problem
(02-08-2019, 13:43 PM)rs@chip Wrote:(28-07-2019, 15:45 PM)ExiizZ Wrote:(27-07-2019, 12:07 PM)Enabled Wrote: I would open the read files with a hex editor like HxD and scroll through to make sure they contain data. Sorry for the late reply. I already tried to read via diagnostic but no communication. I will upload the files soon I already heard about the lock of 1 Processor but its confirmed in several threads that this is not for the mss65 |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content