[Viper1989]

Hi
Do somebody know how to separate turn light with brakes in Mercedes GLA x156
in vediamo ? or in lamps only change some wire ?
car in EU from Kanada.

[MOMOSAM]

Hi
Do somebody know how to separate turn light with brakes in Mercedes GLA x156
in vediamo ? or in lamps only change some wire ?
car in EU from Kanada.

This will need recoding mate

[prsnikt]

also need to see if the turn section led's are installed ... in the sister car (c117) i wanted to do the same but there are no led's installed in the turn section circuit board ... so need to get a rtw rear lamp units and then code those in (gosh)

[Viper1989]

I made coding but I think its not enough.
Also think have to change pinouts in sam.

[Reshi]

i can do it, if you need

[Viper1989]

I solved friend myself.
In wis I checked and 1 cable to every lamp was missing.
From pin 7 turn light you have to give additional cable to SAM to pin 4 and 40.
Next in CBC modul position AusgangFraHinten change on position Blinker hinten.
If I helped somebody just click thanks and rep.
Regards