[sqorpius]

Hi all,

Just a few questions regarding the LCI tail lights retrofit on a BMW F36 gran coupe from 2015.

- Does someone has the right pin-out on the original plug (pin 1,2,3 and 4 brown, red, blue white)

- Does someone has the right pin-out on the LCI light plug (pin 1,2,3,4 and 6, 6 is inner blinker?)


What would be the easiest way to route the two new cables from the inner blinker lights to the REM module, since the F36 has a different trunk mechanism than F33/F32 models. 

Please find the picures attached from the plugs.

Thanks!

[jararak]

there is different pinout for every light, i would suggest follow f30 eba for pinout

and regarding cables, to be honest, i don't saw f36 model yet except pictures, but i suggest use right cable neck, then directly down to REM, same as original harmnes

outside lights
left
– Cable from PIN 1, SW/GE cable, to PIN 2 
– Cable from PIN 2, SW/WS cable, to PIN 1 
– Cable from PIN 5, GR/VI cable, to PIN 4 
right
– Cable from PIN 1, SW/BL cable, to PIN 2 
– Cable from PIN 2, SW/GR cable, to PIN 1 
– Cable from PIN 5, GR/GE cable, to PIN 4 
inner
left
– Cable from PIN 1, SW/VI cable, to PIN 6 
– Cable from PIN 2, BR cable, to PIN 3 
– Cable from PIN 3, GE/SW cable, to PIN 4 
– Cable from PIN 4, GN/GE cable, to PIN 5 
right
– Cable from PIN 1, GN/RT cable, to PIN 5 
– Cable from PIN 2, BR cable, to PIN 3 
– Cable from PIN 3, GE/VI cable, to PIN 4 
– Cable from PIN 4, SW/BL cable, to PIN 6

both new 6pin inner connectors have on pin1 cable for daylight
left light should go to pin 5 at REM to middle connector 174*13b
right light should go to ping 13 at REM to middle connector 174*13b