[PolishSuperstar]

Helo guys, I have astra H 1.9 8v 120ps with dpf, I turned off it with a ECU Safe and Volta, and DPF it's removed, but on Tech2 I have some fault codes. DPF is removed, because check it's not visible. If I scan car with OP-COM any fault codes are not displayed, but when I use Tech2, I have some errors about pressue on DPF.
Anyone can Help me with this problem?

[mkrisch]

ECU Safe and Volta it's not a good way to remove DPF.
Better contact with someone who will make you a professional program, then you will not have a problem with diagnosis.

[PolishSuperstar]

I know it's a not very good software, but I have to learn , how to chip and turn it off egr and DPF. I'am a IT Eng. and I like new challenges. I have 5 1.9 CDTI cars on my company and I have tune it.
1.7 CDTI 80ps
1.9 CDTI 120ps 8V
1.9CDTI 150ps 16V
It's a good time for a learning about chiptuning. On my country chiptuning is expensive, over 200EU for a chip without EGR/DPF removing. If I learn how to do this I can do this on my next car. I like to know how all about me works.

I have one more question. My friend have a 1.9 CDTI remapped to 180ps but his car is with DPF and DPF is removed. If I read his eeprom with MPPS v12 and I'll try to write it to other car fabrical without DPF, Can it works?

[alexracing]

You can write the file only with the same number software