[Marko1337]

Hello guys, today i wanted to try if I could use Xentry PassThru with my Vas5054a on a Mercedes Actros.
I quickly noticed that trucks have a 24v OBD2 Port, which i didnt know before.

Is it possible to buy a 24v adapter for use with the clone vas5054? 
And also does anybody know if Xentry PassThru works well with Trucks? I know I can only use it on newer models, which dont use DAS. But are there any compatibility issues, especially with the vas?

[ibi1961]

Hello guys, today i wanted to try if I could use Xentry PassThru with my Vas5054a on a Mercedes Actros.
I quickly noticed that trucks have a 24v OBD2 Port, which i didnt know before.

Is it possible to buy a 24v adapter for use with the clone vas5054? 
And also does anybody know if Xentry PassThru works well with Trucks? I know I can only use it on newer models, which dont use DAS. But are there any compatibility issues, especially with the vas?

Hallo Marko1337
With YOU -5054 China or orginal you can not do diagnostics on trucks that have a voltage of 24 V. for such diagnostics you can use say Scanmatik 2 which are designed to work 12 or 24 v another device that you can use is the original abritus is only double more expensive than scanmatics, such as KTS 520; 530; 540 ..... because all and one is designed to work with voltages of 12 and 24v. As for the mercedes cargo program passthru works very solidly I buckled and older models through HHT I did diagnostics quite solidly-compared to mercedes xentry with head C4 works some 75-85%. Note tested on 6 models so far.
regards ibi1961