Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW ISTA-D Rheingold 3.44.30 + 3.44.40 + 3.44.50 (EN, DE, CN, RU)
20-08-2014, 18:57 PM,
Post: #21
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
Installl the last INPA v2.12 version and you have EDIABAS v7.30 installed as well.
Giod luck
Quote this message in a reply
[+] 4 users say Thank You to mattydr67 for this post
20-08-2014, 20:05 PM,
Post: #22
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
(20-08-2014, 17:57 PM)pcsmed Wrote:  Were do i find ediabas 7.30 folder

You will find patched ediabas 7.3 for Rheingold in post #1 of the following thread:

http://garage-automotive.com/showthread.php?tid=5212

Extract it and run the installer.
Quote this message in a reply
[+] 6 users say Thank You to beemerboy88 for this post
21-08-2014, 20:21 PM,
Post: #23
XZBMW  RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
I downloaded this 3.41
http://garage-automotive.com/showthread.php?pid=14134

installed it as instructed tried to run it and it worked

then i tried to run the installed 3.44 and it worked to

from a clean win7 ultimate 64 bit sp1 installation you can install the "Standard_Tools_Setup 2.12" then check that you have the 4 files installed (net framework Etc. )
then install the 3.44 (follow instructions )
turn of wireless
plug-in icom2
don't make any network changes
start programaetschcheers

testet on 2002 BMW 735 LI E66

uppsbanditbanditbandit

big thanks for all the help to

Tizwos
Mattydr67
beemerboy88

enjoyenjoyenjoyenjoyenjoy
Quote this message in a reply
[+] 2 users say Thank You to pcsmed for this post
23-08-2014, 17:19 PM,
Post: #24
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
I got the program to work. It runs, provides me with the usage notes, seems to function properly. However, I have two problems and I'm not sure they are related to each other.

First of all, and most importantly...I cannot connect to the car for some reason. It just says no vehicle detected. I have one of those chinese made K+DCan cables, using WIN XP SP 3.

The second problem is that I'm also getting the database missing error. I'm not sure if this would affect my ability to connect to the car. That doesn't seem related to me, since it doesn't register at all. Maybe if it didn't have the necessary information about the car, then it might point to a missing database, but that doesn't seem to be the case. I could be wrong though, because I'm completely new to this. Have never used DIS or INPA. I've tried unblocking files using Powershell 2.0, but it doesn't work. I can't get 4.0 to install on XP. So I've gone in manually and unblocked everything in the SQLiteDBs folder and the TesterGUI folder. That hasn't changed the database error.

Anyway, I've tried installing the drivers that came with the cable, as well as changing some settings around like com port and latency. I also went into ediabas.ini and set the interface to STD:OBD...hopefully that was a good move.

Any ideas?...something I'm missing?
Quote this message in a reply
23-08-2014, 20:11 PM, (This post was last modified: 23-08-2014, 20:12 PM by TizWoz.)
Post: #25
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
(23-08-2014, 17:19 PM)MakSmack Wrote:  I got the program to work. It runs, provides me with the usage notes, seems to function properly. However, I have two problems and I'm not sure they are related to each other.

First of all, and most importantly...I cannot connect to the car for some reason. It just says no vehicle detected. I have one of those chinese made K+DCan cables, using WIN XP SP 3.

The second problem is that I'm also getting the database missing error. I'm not sure if this would affect my ability to connect to the car. That doesn't seem related to me, since it doesn't register at all. Maybe if it didn't have the necessary information about the car, then it might point to a missing database, but that doesn't seem to be the case. I could be wrong though, because I'm completely new to this. Have never used DIS or INPA. I've tried unblocking files using Powershell 2.0, but it doesn't work. I can't get 4.0 to install on XP. So I've gone in manually and unblocked everything in the SQLiteDBs folder and the TesterGUI folder. That hasn't changed the database error.

Anyway, I've tried installing the drivers that came with the cable, as well as changing some settings around like com port and latency. I also went into ediabas.ini and set the interface to STD:OBD...hopefully that was a good move.

Any ideas?...something I'm missing?


did you select it in VCI Manager ?

the data base missing error is probable to do with the language files
Quote this message in a reply
23-08-2014, 21:02 PM,
Post: #26
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
(23-08-2014, 20:11 PM)TizWoz Wrote:  did you select it in VCI Manager ?

the data base missing error is probable to do with the language files

I did select Ediabas in the VCI manager, and tried any other options that might work.

I removed the Chinese language, as mentioned at the start of this thread, because I'm not using it. Does that create an error message? Does Rheingold look for all language databases at startup, or just the active one?
Quote this message in a reply
23-08-2014, 23:02 PM,
Post: #27
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
Got it connected!

Showing lots of faults after scanning, including "transport mode", which is my main reason for this.

Anyone know how to deactivate/delete transport mode using Rheingold? I searched the program for an article on it...found one, but it contained nothing.

Also, I'm able to read the car for faults, and clear most codes, but that seems to be about it. Is that all this application is capable of?
Quote this message in a reply
25-08-2014, 08:18 AM,
Post: #28
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
It has not vertical scroll bar, when it display text document. it very hard to roll the text document.how to solve the problem.
Quote this message in a reply
27-08-2014, 15:32 PM,
Post: #29
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
Here's ISTAGUI resolution mod for 3.44.30

Choices:

1152x864
1280x768
1280x800
1366x768
1440x900
1600x900


Attached Files
3.44.30 Res Mod.txt
File Type: .txt
Downloaded: 92 times
Size: 71 bytes

Reputation: +3 - Dren1977 [+1] , rabihfiras [+1] , ruben_17non [+1]
Quote this message in a reply
[+] 24 users say Thank You to beemerboy88 for this post
28-08-2014, 13:21 PM,
Post: #30
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
Anyone has THAI language for 3.44 ?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,652 627,947 1 hour ago
Last Post: Sedoy
  ista 4.46 Standalone kiranabc 33 3,120 Yesterday, 19:51 PM
Last Post: Siki78
  ista for use whit vcx se db8000 0 46 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 367 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,397 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,491 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 132 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 168 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 671 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,528 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content