Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW ISTA-D Rheingold 3.44.30 + 3.44.40 + 3.44.50 (EN, DE, CN, RU)
28-08-2014, 23:42 PM,
Post: #31
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
(23-08-2014, 17:19 PM)MakSmack Wrote:  I got the program to work. It runs, provides me with the usage notes, seems to function properly. However, I have two problems and I'm not sure they are related to each other.

First of all, and most importantly...I cannot connect to the car for some reason. It just says no vehicle detected. I have one of those chinese made K+DCan cables, using WIN XP SP 3.

The second problem is that I'm also getting the database missing error. I'm not sure if this would affect my ability to connect to the car. That doesn't seem related to me, since it doesn't register at all. Maybe if it didn't have the necessary information about the car, then it might point to a missing database, but that doesn't seem to be the case. I could be wrong though, because I'm completely new to this. Have never used DIS or INPA. I've tried unblocking files using Powershell 2.0, but it doesn't work. I can't get 4.0 to install on XP. So I've gone in manually and unblocked everything in the SQLiteDBs folder and the TesterGUI folder. That hasn't changed the database error.

Anyway, I've tried installing the drivers that came with the cable, as well as changing some settings around like com port and latency. I also went into ediabas.ini and set the interface to STD:OBD...hopefully that was a good move.

Any ideas?...something I'm missing?

I have a same problem, I can not get K+DCan connected. How did you get it connected? Please help. As you mention you deleted Chinese Language. I deleted Chinese and Russian.
Quote this message in a reply
29-08-2014, 05:10 AM,
Post: #32
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
In the setting you have to choose the EDIABAS ( for your D-CAN tool )
In OBD.ini you have to set the same com port as you choosed for your D-CAN tool
Set the com port 9 in the Device Manager and the same in the OBD.ini from EDIABAS/BIN
Try after this connecting the tool to the OBD II and then to the USB
Start the BMW Rheingod software, then go to settings and choose "EDIABAS"
And then go back and start diagnostic in your car
If the setting will not remain and everytime it is change then you must change it in the Registry
Good luck
Quote this message in a reply
[+] 2 users say Thank You to mattydr67 for this post
29-08-2014, 10:05 AM,
Post: #33
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
(29-08-2014, 05:10 AM)mattydr67 Wrote:  In the setting you have to choose the EDIABAS ( for your D-CAN tool )
In OBD.ini you have to set the same com port as you choosed for your D-CAN tool
Set the com port 9 in the Device Manager and the same in the OBD.ini from EDIABAS/BIN
Try after this connecting the tool to the OBD II and then to the USB
Start the BMW Rheingod software, then go to settings and choose "EDIABAS"
And then go back and start diagnostic in your car
If the setting will not remain and everytime it is change then you must change it in the Registry
Good luck

First of all, thank you mattydr67. In the VCI setting I chose Ediabas. Since I installed Ediabas 7.3 so I have 2 Ediabas folders: one in C:/EDIABAS and the other one under C:/Program Files/Rheingold/Ediabas/...but I only have 1 OBD.ini file under C:/EDIABAS/....and I edited as [OBD] Port=Com9 Hardware=USB in Device Manager I also set Port=Com9 Latency=1
I think the problem is here since I have 2 Ediabas.ini files
1) inside C:/EDIABAS folder Ediabas.ini file setting: Interface = STD:OBD
2) inside C:/Program Files/Rheingold/Ediabas/... Ediabas.ini file setting
#################
;# EDIABAS 7.3.0 #
;#################

;=============================================================================
[Configuration]
;=============================================================================
Interface = Remote
Simulation = 0

EcuPath = C:\EDIABAS\ECU
SimulationPath = C:\EDIABAS\SIM
TracePath = C:\Windows\Temp
TraceSize = 1024

ApiTrace = 0
IfhTrace = 0
; IfhnTrace = 0

; SystemTraceSys = 0
; SystemTraceBip = 0
; SystemTraceIfh = 0
; SystemTraceNet = 0

; BipDebugLevel = 0
; BipErrorLevel = 0

UbattHandling = 0
IgnitionHandling = 0
ClampHandling = 0

RetryComm = 1
SystemResults = 1
TaskPriority = 0

; CodeMapping = C:\EDIABAS\BIN\ansi2oem.tab
; LoadWin32 = 0

NetworkProtocol = TCP

; --- neu ab EDIABAS 7.2.0 ---------------------------------------------------
ShowIcon = 0
LogLevel = 0
TraceBuffering = 0
TraceHistory = 0
TraceSync = 1
; TraceWriter = <FilePathName>

;=============================================================================
[TCP]
;=============================================================================
RemoteHost = LMUC203404
Port = 6801
TimeoutConnect = 2000
TimeoutReceive = 2000
TimeoutFunction = 1000
; TimeResponsePending = 5000
; DisconnectOnApiEnd = 1
; InitCmd0 = FE,04,00,03,01
; InitCmd1 = FD,05,00,03,01

;=============================================================================
[XEthernet]
;=============================================================================
RemoteHost = Autodetect
HeaderFormat = 0
TesterAddress = F4,F5
ControlPort = 6811
DiagnosticPort = 6801
TimeoutConnect = 20000

;=============================================================================
[IfhProxy]
;=============================================================================
Port = 6700

;=============================================================================
; End Of File EDIABAS.ini
;===========================================================================
Please help!!! I appreciate every help.
Quote this message in a reply
29-08-2014, 10:44 AM,
Post: #34
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
EDIABAS.rar
File Type: .rar
Downloaded: 88 times
Size: 712 bytes

Hi you need to have the C:/EDIABAS
Copy the OBD.ini file in it
Then copy this EDIABAS.INI ( fron the archive ) and repace existed one from C:/EDIABAS/BIN
( I modified your file to be used with K-DACN )
Try then setting the VCI in the BMW Rheingold
Good luck



Check if you ahve this setting too


EDIABAS.rar
File Type: .rar
Downloaded: 88 times
Size: 712 bytes



Attached Files
Enviroment Variables.rar
File Type: .rar
Downloaded: 55 times
Size: 169.5 KB

Reputation: +1 - 23Andi23 [+1]
Quote this message in a reply
[+] 11 users say Thank You to mattydr67 for this post
29-08-2014, 17:41 PM,
Post: #35
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
(29-08-2014, 10:44 AM)mattydr67 Wrote:  Hi you need to have the C:/EDIABAS
Copy the OBD.ini file in it
Then copy this EDIABAS.INI ( fron the archive ) and repace existed one from C:/EDIABAS/BIN
( I modified your file to be used with K-DACN )
Try then setting the VCI in the BMW Rheingold
Good luck



Check if you ahve this setting too

Thank You Mattydr67 for helping me out
1)Yes I checked System Variables and I have this file:
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\EDIABAS\Bin;%systemroot%\System32\WindowsPowerShell\v1.0\;C:\EDIABAS\BIN\
2) I Then copy your modified EDIABAS.INI ( from the archive ) and repaced existed one from C:/EDIABAS/BIN
3) In Device Manager set Port=Com9 Latency=1 and obd.ini also set Port=Com9 (Does it mater the file name in CAPITAL letter or not?)
4) I then connected K+DCAN cable to OBD (my CAR) first then connected to USB (Laptop run on Windows 7 sorry I forgot to mention this)
5) Started up Rheingold, in VCI config chose EDIABAS STANDARD SETTING (ediabas.ini)
6) press Read out Vehicle data----> pop up error--->Unable to identify vehicle
Please check vehicle communication interface and vehicle ignition (must be set to ON)....I HAD key inside ignition at the time.
-------Next step------
I also tried to replace EDIABAS.INI file inside C:\Program Files\ Rheingold\ediabas\BIN\EDIABAS.INI with your modified file and Still can not get it connect...
NOTE: Inside Rheingold Connection Manager ONLY show device ID= EDIABAS and in BLUE color dot, NOTHING ELSE.

***I bought this K+DCAN cable from the guy did 240E and GTS DCT upgrade on my car and used this cable for the job not long ago so I think the problem is not the CABLE right? or maybe I'm wrong***
Someone advice me to upgrade to latest driver for the cable

http://www.ftdichip.com/Drivers/CDM/CDM%...tified.exe

Should I do that? or I need to modify the cable.
Please help. Thank ALL.helptears
Quote this message in a reply
29-08-2014, 18:32 PM,
Post: #36
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
In what car do you try mate?
You didn't mentioned this
The EDIABAS.INI it is the same as I have in my computer.
I advise you to uninstall the EDIABAS from C:\Programs Files. Maybe there's a conflict
Well you said something about W7. Is it 64bit system?
You need to do something like this:
Plug the tool to the OBD II then to the USB
Turn ingnistion On ( do not start the engine - take care the key muct be in the right position )
Start The BMW Rheingold
Go to teh settings and set the VCI as EDIABAS
Then go to start a diagnostic
Good luck
Quote this message in a reply
[+] 4 users say Thank You to mattydr67 for this post
29-08-2014, 21:37 PM,
Post: #37
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
(29-08-2014, 18:32 PM)mattydr67 Wrote:  In what car do you try mate?
You didn't mentioned this
The EDIABAS.INI it is the same as I have in my computer.
I advise you to uninstall the EDIABAS from C:\Programs Files. Maybe there's a conflict
Well you said something about W7. Is it 64bit system?
You need to do something like this:
Plug the tool to the OBD II then to the USB
Turn ingnistion On ( do not start the engine - take care the key muct be in the right position )
Start The BMW Rheingold
Go to teh settings and set the VCI as EDIABAS
Then go to start a diagnostic
Good luck

I'm so sorry that didn't mention important parts.
I'm running Sony Vaio window XP 32bit which upgrade to window 7 32bit. Does any BMW Diagnostic Program or Software for MacBook? I'm trying to retrieve Error for 2008 E92 M3 only little over 15k miles, it went to LIMP MODE (Reduce Power) a lot lately but after shut it down and restart then all ok. Since I heard this model has issue with Battery and Throttle Actuator. Battery is 6 yrs old may need to be replace to fix a problem and I need program to work so I can DIY and register new battery but I also need to retrieve the error code if it is Throttle Actuator then BMW will replace it for free (California Emission Control System Limited Warranty for 7 years or 70K miles in Service and Warranty manual page 42)
I'll delete EDIABAS.INI file in C:\Program Files\Rheingold\Ediabas\BIN\EDIABAS.INI and will try as you said and give an update.
Once again, I'm too new in this world and You are very helpful. I appreciate for everything you did. yes
Quote this message in a reply
30-08-2014, 05:52 AM,
Post: #38
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU)
No problem mate. You have nothing to sorry.
You only miss this
In W7 can works very good
And for sure you have Net.Framworks 3.5 and 4.0 installed in your computer and you did all from the first post.
Must works. No other tricks.
If you have a D-CAN please open it and check if the OBD pins 7 and 8 are not soldered together.
In some chinese clones this pins are soldered in other it dosen't. But for your car you need to have this pins separately , not soldered together.
Good luck
Quote this message in a reply
[+] 4 users say Thank You to mattydr67 for this post
02-09-2014, 22:34 PM,
Post: #39
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU) + Update 3.44.40
Added version Rheingold 3.44.40

Coming soon 3.44.50
Quote this message in a reply
[+] 4 users say Thank You to zekan23 for this post
03-09-2014, 03:25 AM,
Post: #40
RE: BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU) + Update 3.44.40
I have extracted the BMW ISTA-D Rheingold 3.44.30.rar,but when I start the software I get a massage that tells me something about the license. Can someone help me please?
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 28 2,697 13 minutes ago
Last Post: edtech
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 257 2 hours ago
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,241 Yesterday, 20:02 PM
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,646 626,519 Yesterday, 16:29 PM
Last Post: Sedoy
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,404 Yesterday, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 117 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 154 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 659 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,413 24-03-2024, 23:45 PM
Last Post: armenh7
  REQUEST ista 4.45.21 the ISTAGUI.exe file ddsx 5 322 24-03-2024, 14:15 PM
Last Post: Mathijshee

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content