[hestech]

620 working OK with A4 2018

[wangzhengyugg]

had today tiguan 2021, ECU 17 CP. , worked without a problem. So post setup works.. Thanks Tadk

[Un_known]

640 tested on Golf 7.5 2018, works perfect. Thanks for support

[Tadk]

Update_ODIS-Engineering_12.2-EU_Postsetup_120200.302.650_test


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Engineering 12.2 and updates are from version Engineering 14.2.0-140200.403.20.

Don't spam thread and PM (Private Message) me for password.

Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 12.1.1 with the choice of 5054, then specify the postsetup from version 12.2
Attention: if you have installed or are going to install Service,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Service
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

[hestech]

640 working OK with A4 2018

[paui]

I finally figured out the correct installation process and got odis 12.2 working with VAS5054A and Windows 10.
thanks to all who helped me

Tested 650
VW Phaeton 3D 2008 GFS all good
VW Passat 3G 2018 GFS all good
Seat Leon 5F 2015 GFS all good

[giannis20vt]

I finally figured out the correct installation process and got odis 12.2 working with VAS5054A and Windows 10.
thanks to all who helped me

Tested 650
VW Phaeton 3D 2008 GFS all good
VW Passat 3G 2018 GFS all good
Seat Leon 5F 2015 GFS all good

Could you please share the process please ?
I would like to do the same.
Thank you.

[Tadk]

Update_ODIS-Engineering_12.2-EU_Postsetup_120200.302.660_test


TEST! No guarantee!

For those who have experience and ability please check it by working on real cars and please write if you find errors or not.
This is not an official postsetup, so you use it on your own risk.
Corrected to work with Softing 505x interfaces under Engineering 12.2 and updates are from version Engineering 14.2.0-140200.403.30.

Don't spam thread and PM (Private Message) me for password.

Before you start installing Odis from 5054 on Windows 10, you need to do the following:

1) install PDF viewer

2) enable: control panel - uninstall or change a program - enable or disable Windows features -.Net Framework 3.5

3) install font Arialuni

4) installed Visual C++

5) using file bat., install version 12.1.1 with the choice of 5054, then specify the postsetup from version 12.2
Attention: if you have installed or are going to install Service,
then you need to comment out the program folder during the installation
of programs or updates: Program Files (x86)\
##Offboard_Diagnostic_Information_System_Service
If after updating or installing a folder with the same name as the commented one appears,
then you need to delete it.
For example: if you install or update the service, then comment out the engineering,
if you install or update the engineering, then comment out the service.

6) The installation file of the program and the bat. file must be in the same folder.

For example Engineering, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

For example Service, desktop location:
Run command prompt as administrator:
cd \Users\username\Desktop
run.bat OffboardDiagSetup-Service_VWMCD_6_2_0-0103_8.exe

[aportnov]

Tested 650
The program has been installed, but for some reason it does not see the diagnostic interface. The program says that VAS 6154. If you check through softing, the adapter is visible.However, I installed OffboardDiagSetup-Engineering_12_1_0-0201_19.exe and on top of the postsetup is a test 650. I don't have OffboardDiagSetup-Engineering_12_1_1-0102_2.exe

[fantomel]

mate, this is not a support thread for installs of odis and i think that it was stated on 1st post and in title, ODIS-E 12.2 not some other idiot version. So do a proper install then u can come back and complain - u need OffboardDiagSetup-Engineering_12_2_0-0302_2 and not another.