Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ENTRYNAV2 Deblocking Code
26-01-2022, 13:43 PM,
Post: #21
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
(24-01-2022, 12:03 PM)alexnaoumov Wrote:(23-01-2022, 22:54 PM)sambir Wrote: Can an entrynav2 be virginized on the bench? I heared you cannot fit a used entrynav2 in another car? The Entrynav2 you buy and fit in your car should be virgin/brand new... Well i tried the steps i am unable to load the FSC of the new car. I cleared the fsc on the hu using tool32 and _DEV_UDS_ Hu_delete_persistency_new all fsc went to not available. Then i coded the hu with the new vin and the vin changed Now i cannot load the fsc's of the new vin. Initially the HU went into CP mode. Since the donorcar is my own car i connected it back to my car vo coded it and loaded the original FSC's back on it and it was working again. CP was removed. Now I am back to square one. Removed the fsc and coded the ho with a different vin but am unable to load the FSC of the new vin, it rejects them. |
|||
26-01-2022, 13:49 PM,
Post: #22
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
I’m sure there’s another vin entry somewhere that we are missing, did you get the FGN_CHECK_FAILURE error when loading the FSC’s?
|
|||
26-01-2022, 13:56 PM,
(This post was last modified: 26-01-2022, 14:48 PM by sambir.)
Post: #23
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
(26-01-2022, 13:49 PM)mcrussell Wrote: I’m sure there’s another vin entry somewhere that we are missing, did you get the FGN_CHECK_FAILURE error when loading the FSC’s? Jep i get the same error. When i code it back to the donor vin i can load those Fsc's without any error. And now CP is active again..Need to remove it again by putting it in the car :P EDIT: Got the CP removed again. I wonder what causes the CP triggering on the bench. 1. Set zgw vin to donor vin, shutdown 2. connect entrynav2 and startup again 3. delete persistency new 4. code with FA with new VIN 5. set zgw vin to new car vin 6. reboot 7. load fsc of new vin (fails) 8. then after a while cp is triggered again initially i tought maybe 6wb kombi on my bench is causing it due to vin difference, so i removed it...According to ista kcan communcation error can also cause cp triggering on bench.. |
|||
26-01-2022, 14:08 PM,
Post: #24
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
Did you write fsc vin in fsc tab esys?
|
|||
26-01-2022, 14:49 PM,
Post: #25
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
|
|||
26-01-2022, 15:16 PM,
Post: #26
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
Write the correct vin to the HU using FSC extended WRITEDATAIDENTIFIERBYVIN. That sets the correct HU vin. The FA will only affect the VIN when the unit is flashed.
I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
26-01-2022, 15:52 PM,
(This post was last modified: 26-01-2022, 16:07 PM by sambir.)
Post: #27
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
(26-01-2022, 15:16 PM)DayvG Wrote: Write the correct vin to the HU using FSC extended WRITEDATAIDENTIFIERBYVIN. That sets the correct HU vin. The FA will only affect the VIN when the unit is flashed. I tried also by WRITEDATAIDENTIFIERBYVIN VIN of hu changed. also tried by flashing In the end i cannot load the new cars FSC on the Entrynav2. I can only load the Donorcar's vin when i set the vin back to donorcar, even when CP is triggered i can load the donorcar's fsc's So now im back at donorcar vin, all fsc's cleared. If you guys are 100% sure it will work explain me the steps because I think somewhere in the HU something is still not overwritten since it keeps accepting the donor cars fsc's but not other cars. I changed the vin, i flashed the unit, i coded it, I also changed the vin of ZWG. In the end it does not accept the new fsc's. Whatever I do. |
|||
26-01-2022, 16:20 PM,
Post: #28
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
(26-01-2022, 15:52 PM)sambir Wrote:(26-01-2022, 15:16 PM)DayvG Wrote: Write the correct vin to the HU using FSC extended WRITEDATAIDENTIFIERBYVIN. That sets the correct HU vin. The FA will only affect the VIN when the unit is flashed. Not every entrynav2 you can do this way Coding 2.0 File Service - Region Change/Typekey - SFA iDrive 8.5 REGION CHANGE
BMW Full FSC Set + CarPlay - NBT EVO ID4/5/6/ENTRYNAV2 (CP REMOVE/PATCH) MGU CARPLAY/ANDROID AUTO Activation / MGU PATCH/CP REMOVE (EU service) ISN RESET Remote F/G series BMW KAFAS 2/4 FSCs(7E/BE/BF - 11F/13E/13F) BMW KAFAS4/MRR/RAM Virgin / VIN FSC Matching |
|||
26-01-2022, 19:23 PM,
Post: #29
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
Whatever i tried in all possible ways i cannot load the FSC.
the fsc virginizing only clears fsc's but does not virginize the unit at all! The unit has some check somewhere else for sure. |
|||
27-01-2022, 23:37 PM,
Post: #30
|
|||
|
|||
RE: ENTRYNAV2 Deblocking Code
I had same error with nbtevo when trying to use Fsc codes and patch from hutools. I flashed it with the vin I wanted in fa and used fsc codes from a repair Fsc kit so they were official Fsc’s. Worked no problem after that.
Retrofits: Led lci headlights,Alarm, Cic to nbt to evo, 6” screen to 8” screen to 10” touchscreen, Heated steering wheel n szl change, Folding side mirrors, Auto dim rear view mirror, 6wa, Sport seats, Rear camera, Rear pdc/ rem switch
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW Navigation Maps FSC activation code (request) | rogerkj71 | 96 | 12,278 |
6 hours ago Last Post: zemanely |
|
REQUEST FSC CODE | muskatas | 4,329 | 374,603 |
10 hours ago Last Post: Thorsten |
|
Re-Enabling CarPlay on 2022 BMW with 6P1 code (MGU ID7) | itonus | 5 | 205 |
Yesterday, 14:13 PM Last Post: Node |
|
G82 Cannot Code Seat Module | MatthewLC | 8 | 192 |
Yesterday, 13:37 PM Last Post: itonus |
|
BMW E60 A565 code | GoNz0- | 0 | 35 |
18-05-2024, 10:24 AM Last Post: GoNz0- |
|
How to code hands free driver assistant (G-series) | btvaleks | 21 | 5,625 |
14-05-2024, 07:27 AM Last Post: btvaleks |
|
DDE509 Internal fault 7 code 4703 | GoNz0- | 1 | 154 |
30-04-2024, 19:37 PM Last Post: gabur431 |
|
How to get HWEL from VIN - for EntryNav2 Units | flashxcode | 15 | 3,426 |
29-04-2024, 14:41 PM Last Post: joh4nn_123 |
|
Entrynav2 Component Protection | gt678 | 20 | 3,039 |
21-04-2024, 13:00 PM Last Post: sambir |
|
Requesting fsc DEBLOCKING codes 0x1AA for Headunit | BMWF01 | 1 | 152 |
21-04-2024, 10:05 AM Last Post: BugFix |
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content