[Pedrom92]

Hello, I know it has already been discussed on the forum but it no longer appears because of what happened I have 3 NBT with the message NO SIGNAL, esys cannot see.  
I think it's the EMMC I'm trying to read from one of them to put a backup but I can't.  
I have already removed the resistors, I connect to the laptop, it appears the unit but nothing can be done, I tried using Partition guru and it does not detect the external drive.  
Does anyone know what I'm doing wrong.  what I removed is in the photos and where I connected the wires.  
If anyone can download Baidu (Chinese) I have a link with several dumps for both Evo and NBT but I can't download from there.

Thanks

Edit:
Dumps added in second page. For me not working.

[Jartsa]

Pm the link, I can try.

[Pedrom92]

Hi, I can read the EMMC now. but I screwed up and formatted everything without the Partitions. 
 does anyone know the size of the partitions?

Thanks.

[Pedrom92]

I have backup with 3 files. But EMMC dont have memory to copy this backup.
1 is 15.9mb
2 is 496mb
3 is 6.89gb
Partitions need this space and not possible create.

Thanks.

[babyk]

I have the NBT dump

[Pedrom92]

Its possible Share?

[Pedrom92]

if anyone has a dump they can share.  
of the 3 NBT I have, I can only read from one.  
2 are with micron chip and another SanDisk.

Thanks

[larshutten]

This one was posted before forum crash

[Pedrom92]

This one was posted before forum crash

I have thhis.
but the file is too big I can't write to mine does not have enough memory.

Thanks

Edit:
Use this dump in EMMC SanDisk but NBT same no signal and esys dont see NBT.

[Pedrom92]

If anyone have dump i pay for this.

Thanks