Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
13-02-2022, 23:41 PM,
Post: #11
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
(13-02-2022, 23:25 PM)abdonete Wrote: I HAVE DONE WITH AUTEL PROGRAM THE WRITING I DO NOT THINK THERE IS A PROGRAMMING ERROR then write down your program file and the flash file from the archive that I sent, the cas should work, programming later is possible easily, I think you programmed the cas without removing the key or interrupted programming. |
|||
13-02-2022, 23:45 PM,
Post: #12
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
Flash in first message is good, not damaged.
|
|||
13-02-2022, 23:53 PM,
Post: #13
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
I WILL TEST PROGRAM MY ORIGINAL EEPROM WITH THE FLASH YOU JUST SENT IT TO ME AND I WILL KEEP YOU UPDATED
|
|||
14-02-2022, 06:18 AM,
Post: #14
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
(13-02-2022, 23:45 PM)rus-bmw Wrote: Flash in first message is good, not damaged. the error exists at the level of isn which is not saved in the case I think. and when I program a new key its program and I can launch the starter and in the Diag it displays manipulation error ews impossible to e sinchronise dde with the case |
|||
14-02-2022, 07:10 AM,
Post: #15
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
anyway, Autel not able to adapt used EGS on Exx, it will read wrong keys, which will not work
BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
14-02-2022, 08:35 AM,
Post: #16
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
|
|||
14-02-2022, 10:55 AM,
Post: #17
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
(13-02-2022, 23:15 PM)rus-bmw Wrote:(13-02-2022, 20:31 PM)Alex_Tushino Wrote: EDC16c35 eeprom is read with checksum error and ISN there another one this is possible, but the dde unit has not been changed and only the cas unit needs to be repaired |
|||
14-02-2022, 11:06 AM,
Post: #18
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
Order new CAS from dealer, and next time don't play with Autel or any other.
|
|||
14-02-2022, 11:24 AM,
Post: #19
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
|
|||
14-02-2022, 11:55 AM,
Post: #20
|
|||
|
|||
RE: CAS3 DEAD AFTER UPDATE WITH AUTEL IM608
if someone can analyze the error comes from where and if it can have isn't from dump cas and eeprom edc16cp35 to solve this problem of sync dme- case to start the car
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content