Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ MultiEcuScan + OBDLink
18-02-2022, 18:50 PM,
(This post was last modified: 27-02-2022, 19:14 PM by Clusters.)
Post: #1
|
|||
|
|||
MultiEcuScan + OBDLink
I have MultiEcuScan and OBDLink, red cable that I use with renolink, does anyone use the MultiEcuScan + OBDLink together and if yes what are the results?
Thanks |
|||
18-02-2022, 19:28 PM,
Post: #2
|
|||
|
|||
RE: MultiEcuScan + OBDLink
I had it for some time.
Works great, very fast. Some modules/cars require additional "coloured" adapters, which MES kindly reminds you about. |
|||
19-02-2022, 10:25 AM,
Post: #3
|
|||
|
|||
RE: MultiEcuScan + OBDLink
Anyone know what adapter is needed to access body on Fiat 500 or has pinout
|
|||
19-02-2022, 11:15 AM,
(This post was last modified: 19-02-2022, 11:21 AM by mattydr67.)
Post: #4
|
|||
|
|||
RE: MultiEcuScan + OBDLink
(19-02-2022, 10:25 AM) Liteace Wrote: Anyone know what adapter is needed to access body on Fiat 500 or has pinout To acces in some BCM you need adapter A3 and in other you don't need any adapter. On multiecuscan[dot]net you have all 6 adapters schematic. You also can check what adapters you have to use.. Good luck |
|||
23-02-2022, 22:00 PM,
Post: #5
|
|||
|
|||
RE: MultiEcuScan + OBDLink
I cant get it to work, I think I need driver for OBDLink, anyone know where i can get it?
|
|||
23-02-2022, 22:43 PM,
(This post was last modified: 23-02-2022, 22:43 PM by 5.1.)
Post: #6
|
|||
|
|||
RE: MultiEcuScan + OBDLink
(23-02-2022, 22:00 PM)Liteace Wrote: I cant get it to work, I think I need driver for OBDLink, anyone know where i can get it? Hi, Did you try setting up your interface in settings..? Check attached screenshot... Good luck, Sébastien. |
|||
23-02-2022, 23:08 PM,
(This post was last modified: 23-02-2022, 23:09 PM by Liteace.)
Post: #7
|
|||
|
|||
RE: MultiEcuScan + OBDLink
(23-02-2022, 22:43 PM)5.1 Wrote:Yes, I changed settings but always have:(23-02-2022, 22:00 PM)Liteace Wrote: I cant get it to work, I think I need driver for OBDLink, anyone know where i can get it? "disconnected" at the bottom left |
|||
23-02-2022, 23:15 PM,
Post: #8
|
|||
|
|||
RE: MultiEcuScan + OBDLink
if u used it with renolink you need to use the set speed program and downgrade it's speed from 1 million to 115200. Check marketplace area, there is a tread with renolink and program is there provided to set the speed of your interface.
If you like my post and it helped you please press
|
|||
24-02-2022, 06:54 AM,
Post: #9
|
|||
|
|||
RE: MultiEcuScan + OBDLink
Here you have the driver and utility software to change baudrate
|