Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Corsa d no Comms with ecu
25-02-2022, 20:31 PM,
Post: #1
|
|||
|
|||
Corsa d no Comms with ecu
Corsa d 1.3 cdti ori ECU was water damage so replacement ECU bcm SRS clocks and key replaced now cars does not crank can get Comms with all modules except ECU and on dash there are 2 FS and the airbag lights are flashing any ideas where too look next thanks
|
|||
25-02-2022, 20:34 PM,
Post: #2
|
|||
|
|||
RE: Corsa d no Comms with ecu
why did you replace everything when just correct ecu will do ?
|
|||
25-02-2022, 20:56 PM,
(This post was last modified: 25-02-2022, 20:59 PM by immokill.)
Post: #3
|
|||
|
|||
RE: Corsa d no Comms with ecu
Never RESET BCM and ECU same time on this car.
1reset ipc 2 reset bcm 3 reprogramme original key 4 reset airbag module turned off ignition for 30 seconds 6 programme the ipc 7 programme the bcm 8 programme the airbag module 9 read and clear all fault codes 10 ignition off 30 seconds 11 START CAR |
|||
25-02-2022, 21:08 PM,
Post: #4
|
|||
|
|||
RE: Corsa d no Comms with ecu
Ori ecu was damaged, get matching numbers ecu, retrieve pin from cluster, adapt new ecu with opcom
|
|||
26-02-2022, 04:55 AM,
Post: #5
|
|||
|
|||
RE: Corsa d no Comms with ecu
Thanks guys for info
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content