[Lifestyle]

i tried to read eeprom from dashboard with vvdi2 but it is only supported if working key is present but there is no working key and vvdi2 recognise this dashboard as nec35xx mqb

in this situation i have only full dumps (eeprom and flash) from ecu
ecu is bosch me17.5.26
vvdi2 not accept flash file from this ecu to extract immo data
it say "this file is not supported by this module"
however svci2020 extracted some informations from ecu dumps

CS: 73 F5 0B 96 F2 4D 97 BF EC 35 A4 63 F2 4D 59 29

MAC: AB FC 73 71

Power Class: 1C

any real use of those informations?

at the moment i dont have vag obd helper
any other way to get immo data?

dashboard is vdo a2c90265200 with renesas mcu
possible to read this mcu eeprom with programmer?

and if nothing can be done without vag obd helper in this situation possible to make ecu immo off?

[lupu_sandu]

Dealer key only cheap option

[Lifestyle]

Somebody can make immo off to drive car until dealer key obtained?

[killerghost]

immo off in attach, don't forget to correct chks