[passador83]

Hello. I change cluster on my W211 MY2005 with cluster from MY2007(face lift). Renew new(used) cluster and make adaptation with DAS. Everything work fine except this message on the dash  PRE-SAFE inoperative. Which module must be coded to remove this function? Thanks

[BabeH]

Beside adaptation, you still need to do coding to the cluster to make it work correctly.

[passador83]

Thanks for the answer. What kind of coding you mean? I do initial startup and in control module programming do proper coding acording to my car. Which modul need to be coded also?

[BabeH]

Do pepper coding.

[passador83]

Is this Vediamo? I can't recognize this program.

[BabeH]

Whatever you can code the cluster.

[passador83]

No such option in IC coding. I try to find it in CGW, SAM, ECU but dont see it. Maybe in developer menu in IC, but it us in german and dont know what coding is for that.

[BabeH]

Looks like you don't know much about coding.
You can't just rely on initial startup except you use original modules,
you are now doing retrofit, initial startup won't code it correctly.
Only DAS has the so called development menu,
if you have vediamo just open it you will see everything.
You can also do it in DAS.
I am not talking about CGW SAM ECU !
And of course those code are in German.

[passador83]

Thanks for the tip BabeH. This is what i looking for. I will try later.

[BabeH]

The pre-safe wording are so obvious don't know why you keep saying can't find it.
That is coding!
Not an option is setup menu.