[a8lang]

Restart MMI and remove the key from the ignition and then put it back in confusion should change from 01043 - control module .; Wrong software version 03276 - please check Software Version Management.

Hi, thanks for response
Please can you explain more detail. I have Audi A6 2012. Do not understand what means "put it back in confusion"

Thanks

Solved your problem?
I have same dtc in the 5F. Incorrect software version 01043.

[ayrtonoc]

Same error here on A1 after only a bluetooth update from P1432B to P16342

How I can get rid of?? Everything works, bluetooth problems solved, but 5F error hurts me!

[Albert_Swafega]

Restart MMI and remove the key from the ignition and then put it back in confusion should change from 01043 - control module .; Wrong software version 03276 - please check Software Version Management.

Hi, thanks for response
Please can you explain more detail. I have Audi A6 2012. Do not understand what means "put it back in confusion"

Thanks

Solved your problem?
I have same dtc in the 5F. Incorrect software version 01043.

these links may describe solution in enough detail for you to resolve error code.

Hope it helps

Albert

[ayrtonoc]

Already tried the first, no luck, the error never changes from 01043.
The unit works at functional level, but it's obvious that there is somewhere a problem, maybe only "formal". I could try the green menu DTC clear, but even there i', worried that an unclear solution could lead to greater problems that an inoffensive 01043 on VCDS...

[ayrtonoc]

Restart MMI and remove the key from the ignition and then put it back in confusion should change from 01043 - control module .; Wrong software version 03276 - please check Software Version Management.

Hi, thanks for response
Please can you explain more detail. I have Audi A6 2012. Do not understand what means "put it back in confusion"

Thanks

Solved your problem?
I have same dtc in the 5F. Incorrect software version 01043.

these links may describe solution in enough detail for you to resolve error code.

Hope it helps

Albert

Did you think that a full reflash from red menu could fix this kind of error?
I'm worried of bricking the unit...

[kaiserstumm]

Incorrect SW version can be resolved via ODIS by doing SVM or with the xor calc. Basicly we abort the documention at the end off the update and the new sw version is not aproved by the device.

[ayrtonoc]

Hi Kaiser, i can't clear the 01043 with XOR: the 5F doesen'r accept the adaptation.
So i'm brainstorming between keep the 5F in that condition, leaving alone that error, or flashing alla the unit with 16342 via red menu, because at today i have only updated the bluetooth module by the "setupMMI -> update" white user menu...