[mitica]

You think DTC > Control > scroll 73 > then Send test
Tray that not help
[/quote]

Yes, but was 73 the number for this error under qualified dts? If yes, no luck then.
[/quote]

I dont know is 73 the number. How would I know what is the right number.
I read on other forum and read that I need to scroll on 73..

[911Turbo]

@Mitica - Could you explain how you removed the SVM error with "Scientific Calculator"?

[mitica]

@Mitica - Could you explain how you removed the SVM error with "Scientific Calculator"?

You must use VCDS
Go on [5F - Information Electr.]
[Adaptation - 10]
Then go on Channel 15 and read
The number you get use like this
*your number* ^ 51666= what you get enter in value
And then click Save
http://ostermiller.org/calc/calculator.html

[Sander77]

I dont know is 73 the number. How would I know what is the right number.
I read on other forum and read that I need to scroll on 73..

If you go to the dtc menu, you choose qualified dtc and there you see active errors, number on front of your error there, is the one you choose when you send pass in dtc control menu.

For example, i had 17 or 13(cant remember) for invalid data set, after 2nd or 3rd try error was gone. It does not mean it will work with this error.

As per rumors around the world 01043 may be you updated with wrong 900 or some modules are not updated correctly. Just rumors. Before dealer i would run 900 one more time, nothing to loose!

[mitica]

I dont know is 73 the number. How would I know what is the right number.
I read on other forum and read that I need to scroll on 73..

If you go to the dtc menu, you choose qualified dtc and there you see active errors, number on front of your error there, is the one you choose when you send pass in dtc control menu.

For example, i had 17 or 13(cant remember) for invalid data set, after 2nd or 3rd try error was gone. It does not mean it will work with this error.

As per rumors around the world 01043 may be you updated with wrong 900 or some modules are not updated correctly. Just rumors. Before dealer i would run 900 one more time, nothing to loose!

Im 100% sure that Im f***ed with something in K900. Maybe you know right K900 link

I tray to scroll 50 in dtc control and test pass 3-4 times and nothing fault still here.

[Sander77]

Im 100% sure that Im f***ed with something in K900. Maybe you know right K900 link

Pm sent with sw 900 links.

[pablo202]

Maybe You have mac Apple ?

[mitica]

I tried everything, nothing remove Fault in 5F 01043 - Control Module; Incorrect Software Version
K0900 Firmware is up to date..

[AUDI S LINE]

Restart MMI and remove the key from the ignition and then put it back in confusion should change from 01043 - control module .; Wrong software version 03276 - please check Software Version Management.

[mitica]

Restart MMI and remove the key from the ignition and then put it back in confusion should change from 01043 - control module .; Wrong software version 03276 - please check Software Version Management.

Hi, thanks for response
Please can you explain more detail. I have Audi A6 2012. Do not understand what means "put it back in confusion"

Thanks