Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
IHKA3 retrofit, 3AG stopped working
28-04-2022, 07:39 AM,
Post: #1
|
|||
|
|||
IHKA3 retrofit, 3AG stopped working
Hi everyone,
Basically I want to retrofit IHKA3 on my 2012 car. Removed the old one and in with the new one 6820235. Because it got late last evening, I didn`t do the wirings/codings, so today the IHKA control panel, radio controls, climate controls wasn`t working, as expected. Got at work without climate control at all, reversed the car and reverse camera is black. Is this because of the new IHKA? Is reverse camera connected to IHKA in any way? I simply don`t want to do the wirings and find out the camera will not work with the IHKA3. Car in question F31 with VIN: F786504 Thanks in advance. |
|||
28-04-2022, 08:01 AM,
Post: #2
|
|||
|
|||
RE: IHKA3 retrofit, 3AG stopped working
which car is this
|
|||
28-04-2022, 08:11 AM,
Post: #3
|
|||
|
|||
RE: IHKA3 retrofit, 3AG stopped working
|
|||
28-04-2022, 08:50 AM,
Post: #4
|
|||
|
|||
RE: IHKA3 retrofit, 3AG stopped working
There is no direct connection between reverse camera and IHKA, however it is possible that the new IHKA module is killing signals on the LINBUS which the camera needs. You need to correct all the wiring to accommodate the new IHKA in the first instance.
Just to prove a point plug in the original IHKA and see if the camera works. |
|||
28-04-2022, 09:01 AM,
(This post was last modified: 28-04-2022, 09:02 AM by XuLeTZ.)
Post: #5
|
|||
|
|||
RE: IHKA3 retrofit, 3AG stopped working
(28-04-2022, 08:50 AM)maxwell4321 Wrote: There is no direct connection between reverse camera and IHKA, however it is possible that the new IHKA module is killing signals on the LINBUS which the camera needs. You need to correct all the wiring to accommodate the new IHKA in the first instance. I think will try first the wiring this afternoon Wiring is easier for me than taking the glovebox off again and plug the old IHKA. Thank you once again. (28-04-2022, 08:50 AM)maxwell4321 Wrote: There is no direct connection between reverse camera and IHKA, however it is possible that the new IHKA module is killing signals on the LINBUS which the camera needs. You need to correct all the wiring to accommodate the new IHKA in the first instance. Only need 2 wires for new IHKA3, from KCAN to KCAN2 in FEM and it should be good. Will kick in ISTA as well and see what`s going on in the car's mind. |
|||
28-04-2022, 09:41 AM,
Post: #6
|
|||
|
|||
RE: IHKA3 retrofit, 3AG stopped working
IHKA -> KCAN_H Pin 22 to Pin 34 FEM A173*7B
IHKA -> KCAN_L Pin 23 to Pin 33 FEM A173*7B IHKA3 -> KCAN2_H Pin 22 to Pin 10 FEM A173*10B IHKA3 -> KCAN2_L Pin 23 to Pin 11 FEM A173*10B If you can't see IHKA3 in esys then you will need write manually and code it Successfully retrofit on BMW F30 335xi 248,302,3AG,430,5AG,5AS,6NS,8TH,IHKA3
|
|||
28-04-2022, 10:44 AM,
Post: #7
|
|||
|
|||
RE: IHKA3 retrofit, 3AG stopped working
(28-04-2022, 09:41 AM)Siki78 Wrote: IHKA -> KCAN_H Pin 22 to Pin 34 FEM A173*7B Thanks, had this info. Will try later today to tap the wires 33 and 34 from A173*7B to 10 and 11 in A173*10B. Thinking of just disconnecting the pins from old IHKA and do a bridge to the KCAN2 wires. Wrap them up and make a jumper wire that goes from cable to cable just in case I need to revert them back Thanks |
|||
28-04-2022, 15:31 PM,
Post: #8
|
|||
|
|||
RE: IHKA3 retrofit, 3AG stopped working
All sorted after wiring the IHKA3 to KCAN2.
Deleted the IHKA ecu from SVT, injected new CAFD and Code it. Reverse camera also working now. Thanks everyone. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
G21 paddles retrofit | bm92 | 5 | 173 |
Yesterday, 21:07 PM Last Post: bm92 |
|
Is it possible to retrofit G30 seat to G20? | hitit | 0 | 75 |
08-05-2024, 14:22 PM Last Post: hitit |
|
BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS | intel123 | 892 | 469,846 |
07-05-2024, 04:30 AM Last Post: SkeYT |
|
Ista-D last working version please help | Warsteiner | 4 | 296 |
06-05-2024, 19:40 PM Last Post: 2013m5 |
|
retrofit USB BMW E63 | Jalami | 7 | 123 |
06-05-2024, 18:48 PM Last Post: stecom90 |
|
G01 - lost communication with DSC but it's working | Krysiaman | 3 | 94 |
29-04-2024, 14:31 PM Last Post: Krysiaman |
|
BMW MG1CS003 working hours reset | ArthurMichael | 0 | 110 |
26-04-2024, 17:48 PM Last Post: ArthurMichael |
|
BMW N13 MEVD17.2.5 working hours reset | Adel75 | 2 | 108 |
26-04-2024, 11:48 AM Last Post: Adel75 |
|
Bmw G31 retrofit Mgu id7 atm problem | intranet | 20 | 2,517 |
26-04-2024, 08:06 AM Last Post: smilo |
|
Kafas issue aftrer ACC Retrofit | It3_Magic | 14 | 687 |
23-04-2024, 07:44 AM Last Post: It3_Magic |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content