[pavlo321]

Hi there,

I have Xentry Passthru 2018-12 installed and configured to use Mini VCI X-Horse J2534 cable. It works with W212, W204 but I am having some trouble connecting to W222 S Class.
It detects ignition but when reading vin, it can't connect/read vin. I have to input manually and then it loads but is not connected/can't scan any ECUS.

Can anyone help with this issue? 

Thank you.

[ross2018]

I had that cable and the number of the modules read by it it was low.
Try vas5054a.

[pavlo321]

I had that cable and the number of the modules read by it it was low.
Try vas5054a.

Thanks. Can you recommend a good place to buy the cable thats not too expensive? 
is it compatible and does it have drivers with Win 7/10 X64 bit ?

Thank you

[ross2018]

I had mine from aliexpress. Drivers are here, just search for them.

[Fredrick Kamau]

Else you can try VXdiag which is fully J2534-2 compliant. It has never failed me in W245 and Toyota models.

[MZ2711]

Else you can try VXdiag which is fully J2534-2 compliant. It has never failed me in W245 and Toyota models.

Anyone have any experience with the "VXDIAG VCX NANO" cable  as passthru with xentry/DAS?

[Airbus]

Hi there,

I have Xentry Passthru 2018-12 installed and configured to use Mini VCI X-Horse J2534 cable. 

Hello,

where is the configuration for this cable?

[gcs190]

install your passthru drivers properly and Xentry will offer it on startup. As with any other Passthru device.

[bingo1309]

please buy other cables this won't support. using Totoya TIS cable won't help you