Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Does Nissan Consult III work with Renault CAN CLIP software?
|
12-09-2014, 16:50 PM,
Post: #1
|
|||
|
|||
Does Nissan Consult III work with Renault CAN CLIP software?
Hi,
I was wondering if a Nissan Consult III hardware works with Renault CAN CLIP (v139 for example)? This is the Consult III I'm talking about (Chinese clone) ![[Image: Nissan_consult_III_diagnostic_set.jpg]](http://b2bimg.bridgat.com/files/Nissan_consult_III_diagnostic_set.jpg) ![[Image: Nissan%20Consult%203%20OBD2%20Profession...ool_03.jpg]](http://www.obd2repair.com/images/Nissan%20Consult%203%20OBD2%20Professional%20Diagnostic%20Tool_03.jpg) And if yes.. Will it support reprogramming, etc..? And is it recommended over SONDE as it has the newer Alliance PCB.. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
12-09-2014, 18:28 PM,
Post: #2
|
|||
|
|||
|
RE: Does Nissan Consult III work with Renault CAN CLIP software?
If that is recognized as VI alliance by drivers this will work with Clip and Consult too
As per photo I'd say that there is very high chance of success. Usually you have to try to know that as Chinese smart guys might put the necessary chips there but do not connect it. |
|||
|
|
|
12-09-2014, 20:27 PM,
Post: #3
|
|||
|
|||
RE: Does Nissan Consult III work with Renault CAN CLIP software?
(12-09-2014, 16:50 PM)Khaleal Wrote: Hi, Yes it will work with both, it is alliance B Do not but the ones flying around with the WHITE < <16 PIN CONNECTOR. As regards programming, im unsure because I never tested, However there are can clip interfaces that are alliance B and they work fine. |
|||
|
|
|
13-09-2014, 03:23 AM,
(This post was last modified: 09-10-2014, 03:00 AM by volavka.)
Post: #4
|
|||
|
|||
|
RE: Does Nissan Consult III work with Renault CAN CLIP software?
Nissan consult 3 can work with Nissan and Renault cars, while there is only nissan software come with the interface, you need to buy renault software extra
|
|||
|
|
|
13-09-2014, 04:22 AM,
Post: #5
|
|||
|
|||
|
RE: Does Nissan Consult III work with Renault CAN CLIP software?
Why do you need to buy Renault softwares?
The Nissan Consult III and Renault CAN CLIP softwares you can find in this forum for free Good luck |
|||
|
|
|
13-09-2014, 13:12 PM,
Post: #6
|
|||
|
|||
RE: Does Nissan Consult III work with Renault CAN CLIP software?
(12-09-2014, 20:27 PM)TizWoz Wrote:(12-09-2014, 16:50 PM)Khaleal Wrote: Hi, Can you give me a link of alliance B clips available for sale? I searched online and only found SONDEs.. BTW.. What's the best quality clone clip that can be bought online? I'm using this right now: ![[Image: Good%20quality%20can%20clip2.jpg]](http://adkautoscan.ufashionhandbagshop.com/download/product_photo/renault%20can%20clip/Good%20quality%20can%20clip2.jpg)
|
|||
|
|
|
17-09-2014, 16:59 PM,
Post: #7
|
|||
|
|||
RE: Does Nissan Consult III work with Renault CAN CLIP software?
(13-09-2014, 13:12 PM)Khaleal Wrote:(12-09-2014, 20:27 PM)TizWoz Wrote:(12-09-2014, 16:50 PM)Khaleal Wrote: Hi, I have good quality alliance b type clip interface that works well with both software's no problem £100.00 |
|||
|
|
|
17-09-2014, 20:19 PM,
Post: #8
|
|||
|
|||
|
RE: Does Nissan Consult III work with Renault CAN CLIP software?
Man buy original, the rest are only bad copy's
|
|||
|
|
|
25-09-2014, 03:27 AM,
Post: #9
|
|||
|
|||
|
RE: Does Nissan Consult III work with Renault CAN CLIP software?
Renault can clip v142 software. There are two versions, both work, you can choose either one.
|