[Avtoprofi]

Ok, i have look to my tool, realy it is not there, but a6 2004- have the posibiliti for edc16, maybe if someone can say if he ewer have try whit this on a4, or if you will make the try

---

or here you have the softwer for digi, and you can use the toll as eeprom programer [/i]

[pawel7924]

Try vw passat b6 -> ecu by obdII if digi recognize version you can make changes, ecu's in vag group are the same. ...

[pioan]

I try with passat and read real km from ecu but when i modify it remain the same, so it not work. Now i try to get out ecu but it has 4 bolts who was cut from factory and it is hard to extract.

[Dash_Burner]

I try with passat and read real km from ecu but when i modify it remain the same, so it not work. Now i try to get out ecu but it has 4 bolts who was cut from factory and it is hard to extract.

The only edc16 that i have done at the past was vw caddy. I did instruments first and after the ecu by obd with digiprog 4.88..I remember that it took a long time (about half hour) for digiprog to correct milleage to that ecu...

[Avtoprofi]

I have done edc16 passat, touran and caddy without problem and need maybe 10-15 min depends from car to car, audi i have not try yet with digi, but i wuld try the a6 edc16 solution if it go or not

[pioan]

It is not working with digiprog by obd. With edc from vw list read km and when i try to change digiprog work for 10-15 min but not make any changes. With a6 95320 not read correct mileage.

[Avtoprofi]

Then you open the ecu and desolder the eeprom, make backup in case somthing go wrong,and make the changes, you cam make it with digi on the eeprom stecker